Specifications; Supplied Accessories - Sony SLV-K877MN/PS Operating Instruction

Specifications

System
Channel coverage
SLV-K877MN/PS
VHF R1 to R12, E2 to E12, NZ1 to NZ11
UHF E21 to E69, R21 to R60
CATV S01 to S05, S1 to S41
SLV-K867CH/PS
VHF R1 to R12, C1 to C12, E2 to E12, NZ1 to
NZ11, SA4 to SA13
UHF E21 to E69, R21 to R60, B21 to B69, C13
to C56, SA21 to SA68
CATV S01 to S05, S1 to S41
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Inputs and outputs
SLV-K877MN/PS
LINE-1 IN and LINE 2 IN
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO IN, phono jack (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-1 OUT and LINE 2 OUT
VIDEO OUT, phono jack (1 each)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (2 each)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
SLV-K867CH/PS
LINE-1 IN and LINE 2 IN
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-1 OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jack (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
72
Additional Information
General
Power requirements
110 – 240 V AC, 50/60 Hz
Power consumption
SLV-K877MN 30W
SLV-K877PS 28W
SLV-K867CH/PS 26W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 430 × 100 × 282 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 4.7 kg

Supplied accessories

Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Audio/video cable (3-phono to 3-phono) (1) (SLV-
K877MN/PS only)
Microphone (1)
Design and specifications are subject to change
without notice.