Connect To Bluetooth; Connect With Bluetooth Devices - Philips SA3CNT08 User Manual

1
Connect the device to a PC by using the
USB cable.
Make sure that you have switched on
the device.
2
On the device, switch on the USB storage:
On the pop-up screen, tap Turn on
USB storage.
3
On the PC, under My Computer or
Computer,
Connect;
4
to the Connect.
Note
When you switch on the USB storage mode, you
on the device, switch off the USB storage mode.

Connect to Bluetooth

Through Bluetooth, you can do the following
wirelessly on Connect:
another connected Bluetooth device;
Listen to music through stereo
Bluetooth headphones;
Listen to music through Bluetooth
speakers.
18 EN
Connect

Connect with Bluetooth devices

You can connect Connect with Bluetooth
devices in the following ways:
Connect another Bluetooth device;
Get connected by another Bluetooth
device.
Tip
Before the connection, consult the user manual of the
Bluetooth device to get its Bluetooth pairing passcode.
Or, try 0000 or 1234.
Connect another Bluetooth device
1
On the Bluetooth device, make sure that
the device is discoverable by another
Bluetooth device.
Consult the user manual of the
Bluetooth device for information.
2
On Connect, search for the Bluetooth
device:
From the Home screen, tap
Wireless & networks > Bluetooth
settings;
If necessary, tap to switch on
Bluetooth;
» If the function is enabled, the tick
box is selected.
is displayed on the status bar.
»
Tap Scan for devices.
» The device is displayed under Scan
for devices after it is discovered.
3
Pair with the device:
On Connect, tap the device, and enter
the passcode as prompted;
On the device, enter the passcode as
prompted.
» A message is displayed when the
pairing is complete.
Get connectedby another Bluetooth device
1
On Connect, make sure that Connect is
discoverable by another Bluetooth device:
>