Establish Snmp Communication - GE IC755CxS06RDx User Manual

Software
For public disclosure

3.14.6 Establish SNMP Communication

Attention
➢ ➢ To establish SNMP communication with the QuickPanel
Download the Project to the network connected QuickPanel
1.
Runtime.
2. Configure the Trap Destinations
Note If you do not want to be notified of Traps, you do not need to configure Trap
Destinations.
Enable a SNMP Agent.
3.
4. Export the MIB to a SD Card.
Auto-discover or connect the QuickPanel
5.
Once connected, load the MIB
The SNMP Manager communicating with QuickPanel
Tags and receive Alarms/Trap notification from the QuickPanel
SNMP Agent.
Tip � If you get out of sequence in the steps for configuring Traps and starting the
SNMP service to establish the SNMP communication,
again using the QuickPanel +
SNMP communication requires that both the
QuickPanel + device and the SNMP Manager
running on a machine are connected on a valid
Ethernet network.
with the IP Address of the SNMP Manager.
+ SNMP Agent from the SNMP Manager.
to the SNMP Manager tool.
+ device can query values for HMI
enable or disable
OS Utilities Setting tool.
+ device
+ device and start
+ device operating as a
the SNMP Agent
GFK-2847R 53