Honeywell SLG 700 User Manual page 102

Start Capture:
This button activates the process of collecting a new background echo for the selected type and
length. This process should only be performed when there is no product in the region over which
the background will be captured. The length of this region varies with the transmitter model,
mounting location and probe type. A pop-up message similar to the one shown below will be
displayed indicating the required length.
If the OK option is selected, the transmitter will start the capture sequence and a progress bar will
be displayed to show the progress. The function of the button will also change, as shown below,
allowing the user to cancel the currently active sequence if required.
Upon completion of the process, a pop-up message such as the one shown below will be
displayed indicating whether the capture was successful or not. In the case of a successful capture
there may also be some additional information or warnings provided. The new background is
immediately applied by the transmitter, but see the comments above for the active Background
Type parameter.
SLG 700 Series HART Option User's Manual
Page 94 Revision 5