Power-Up; Front Panel Indicators - Philips DVAA Series Installation Instructions Manual

DB-9 Pin Configuration For RS-232 Port
Pin
1
2
3
4 Not Connected
5 Ground

1.6 Power-Up

Select the correct voltage before supplying power to
the unit.
Use the voltage selector switch located on the rear panel
of the unit, between the power connector and the On/Off
Switch.
Caution: Applying incorrect voltage could damage unit.
Once the correct voltage has been selected and all
connections have been made, apply power to the unit.

1.7 Front Panel Indicators

D i s k A r r a y
P O W E R 1 2 3
Hard Drive Status Indicators (Green Lights)
Light On: Drive present and operating.
Light Flashing: Drive present, error detected.
Light Off: No drive present, or drive damaged beyond recognition.
Use
DCD
RX
TX
H A R D D R I V E S T A T U S
4 5 6 7 8
LINK READ WRITE
ACTIVITY ETHERNET
Pin
6
7
8
9
1 0 0
5
Use
Not Connected
RTS
CTS
Not Connected