Connect The Pedal Cord - Yamaha CLAVINOVA CLP- 685 Owner's Manual

5.
Connect the speaker cord.
5-1.
Remove the twist tie attaching the speaker
cord.
5-2.
Insert the speaker cord plug into the
connector so that the tab extends toward
the front when viewed from the rear.
6.

Connect the pedal cord.

6-1
6-3
6-1.
Insert the pedal cord plug into the
[PEDAL] connector.
Insert the pedal cord securely
until the metal part of the
cord plug disappears from
view. Otherwise, the pedal
may not function properly.
6-2.
Attach the cord holders to the instrument,
then clip the cord into the holders. At this
time, be careful that the pedal cord isn't
loose between the plug and cord holder.
6-3.
Use a twist tie to bundle the pedal cord.
7.
Insert the plug of the power cord
into the [AC IN] connector.
8.
Attach C.
6-2
8-1.
Attach the 4 × 14 mm round head screws to
the brackets on the upper side of E and F.
Make sure to leave a slight gap by not fully
tightening the screws.
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
8-1
F
8-1
Assembling the Clavinova
E
113