Viewing Pictures From Equipment Connected To The Tv - Sony KDE-P37XS1 Operating Instructions Manual

Viewing pictures from equipment connected to the TV

1
Connect your equipment to the designated TV socket, as indicated on page 50.
2
Switch on the connected equipment.
3
To watch the picture from the connected equipment, press the
correct input symbol appears on the screen.
Symbol
4
Press the
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the side of the TV and select
input signal using the instructions above. Next, refer to the "Sound Adjustment" section of this
manual and set "Dual Sound" option to "A" on the sound menu screen (see page 24).
52
Additional Information
Input Signals
• Audio / video input signal through the Scart connector I
1
• RGB input signal through the Scart connector I. This symbol appears only if
1
an RGB source has been connected.
• Audio / video input signal through the Scart connector J.
2
• RGB input signal through the Scart connector J. This symbol appears only if
2
an RGB source has been connected.
• Audio/video input signal through the Scart connector K.
3
• S Video Input signal through the Scart connector K. This symbol appears only
3
S
if an S Video source has been connected.
4 • Component input signal through the Y, P
signal through G.
• Video input signal through the phono socket B and Audio input signal through
5
C.
• S Video Input signal through the side S Video input jack A and Audio signal
5
S
through C. This symbol appears only if an S Video source has been connected.
button on the remote control to return to the normal TV picture.
button repeatedly until the
jacks H and audio input
/C , P /C
B B R R
5 or 5
S