Digital Audio Out - Philips 19PFL5402D User Manual

Installation 7 Source
Language TV
Autoprogram AV1
Source AV2
Clock HDMI
Weak channel installation Side
Current software info PC
Reset AV settings
Info
Installation 7 Clock
Language
:
Autoprogram
Source
Clock
L
VIDEO IN
HDMI VGA
Weak channel installation
R
S-VIDEO
Current software info
PC IN
Reset AV settings
HDMI
Info
AV2:
DVI
Installation 7 Source
Audio L/R
Language TV
Autoprogram AV1
Source AV2
Installation 7 Reset AV settings
Clock HDMI
L
Language
Weak channel installation Side
DVI
R
Autoprogram Start now
Current software info PC
Source
Reset AV settings
Clock
Weak channel installation
Info
Current software info
Reset AV settings
Info
Installation 7 Clock
Language
:
Autoprogram
Source
Clock
Weak channel installation
Current software info
Reset AV settings
Info
Installation 7 Reset AV settings
Language
Autoprogram
Start now
Source
Clock
Weak channel installation
Current software info
Reset AV settings
Info
6
2
3
AM
Y Y
Pb Pr
L R
6
Clock
AM
2
3
4
Source
This menu allows you to identify the accessory devices you have
connected to the external inputs/outputs.
Select Source in the Installation menu.
Press the cursor right to enter the list, and press up/down key to
the selected input.
Press OK button to confi rm.
Analog Audio In
If your accessory device has a DVI output connector, only the
video signal is transmitted in digital format. To input an audio signal,
please connect the analog audio L and R outputs to the TV's L and
R AV2 audio input plugs.

Digital Audio Out

In addition to accepting audio input through HDMI, the TV can
output Digital audio through the DIGITAL AUDIO OUT
(SPDIF OUT) connector to an external amplifi er or receiver.
If your amplifi er or receiver has a matching connector for Digital
Audio In, you can connect it with a single cable to the TV's
DIGITAL AUDIO OUT (SPDIF OUT). See Cover and Connection.
This allows you to use your TV as a clock.
Press the MENU button on the remote control.
Use the cursor down to select Installation in the Settings menu.
Press the cursor right to enter the list, and press up/down key to
set the time. (hour/ minute/ AM or PM)
Press OK button to confi rm.
14