Fujitsu fi5120C Cleaning And Maintenance page 18

fi-5120C / fi-5220C Image Scanner Operator Guide
For Windows 95 / Windows NT 4.0
1. When turning on the power, check that the scanner is connected to your PC.
2. Right click the "FUJITSU Scanner Control Center" icon displayed in the task tray, then select
"Option".
3. Click "Device Set" tab.
The following screen is displayed.
You can confirm the following information in this panel:
Total number of scans
●
Pad counter (approximate number of scans after resetting the pad counter)
●
Pick roller counter (approximate number of scans after resetting the Pick roller counter)
●
1 2 3 4 6
5
1 2 3 4 6
5
©
TROUBLE SHOOTING
CONTENTS MAP
TOP