Chapter 7 – Remote Control - Philips 23PF9976i User Manual

Remote Control
7.2 Using the remote control
Do the following steps to ensure that your remote control
is ready for operation.
1 Pull out the plastic insulation sheet from the battery
to enable the remote control to function.
2 Pull out battery cover and check whether the lithium
battery is placed correctly. The words on the battery
should face you when you remove the battery cover.
3 Insert battery cover and the remote control is now
ready for use.
Note : the battery supplied with the set does not contain
mercury or nickel cadmuim so as to protect the environment.
When discarding your batteries, use the recycling options
available.
23iF9946_12_StDFU_ENG.p65
23
23 8/31/04, 4:30 PM