Paprwidth Mismatch; Paper Size Not Detected - Canon ipf8300 User Manual

Error Message >
The loaded paper is too small.
(When you have attempted to print a test
print sheet or other printer status informa-
tion.)

PaprWidth Mismatch

When Detect Mismatch in the Control Panel menu
is set to Pause or Warning, the width of the loa-
ded roll does not match the width specified in Fit
Roll Paper Width in the printer driver.
13

Paper size not detected.

Paper has been loaded askew, or warped paper has been loaded.
1084
PaprWidth Mismatch
Downloaded from ManualsPrinter.com Manuals
Messages regarding paper >
Cause
Cause
Cause
Corrective Action
2. Replace the roll with a roll 10 inches wide or larger.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Press ▲ or ▼ to select Print, and then press the OK button to
resume printing.
However, note that this error may cause paper jams and affect
the printing quality.
Press ▲ or ▼ to select Stop Printing, and then press the OK
button.
Follow these steps to replace the roll to match the width speci-
fied in the printer driver.
1. Press ▲ or ▼ to select Change Paper, and then press the
OK button.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2. Replace the paper with paper compatible for borderless print-
ing.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box displayed
when you select Fit Roll Paper Width in the printer driver
matches the width of the roll loaded in the printer, and then try
printing again.
→P.774
→P.777
Corrective Action
→P.786
→P.789
→P.774
→P.777
Corrective Action
Follow these steps to reload the roll.
1. Lift the Release Lever.
2. Adjust the right edge of the roll to
make it parallel to the right Paper
Alignment Line.
3. If "Not finished printing. Finish
printing remaining jobs?" is
shown on the Display Screen,
press the OK button.
Printing will resume, starting
from the page on which the error
occurred.
iPF8300