Silvercrest DZ 20 DE Operation And Safety Notes page 26

274299_B_Zeitschaltuhren_digital_content_RO_BG.indd 26
4. Set the respective time using the
HOUR
12
5. Press the TIMER
selection. The switch-on time has been
programmed. The LCD
switch-off time.
6. Set the switch-off time as described in
steps 3. to 5.
7. After entering the program, confirm with
the CLOCK button
onds until the current time is displayed.
Set current status
If the clock should be on at the current time
(ON), the ON / OFF / AUTO button
be pressed until ON appears on the screen.
Then press the button again so AUTO appears.
If the clock should be off at the current time
(OFF), the ON / OFF / AUTO button
be pressed until OFF appears on the screen.
Then press the button again so AUTO appears.
26 GB
and MINUTE
button to confirm the
8
1
or wait 10 sec-
9
buttons.
2
will switch to
must
5
must
5
22.04.16 07:19