Eliminating Minor Faults Yourself - Siemens CI**R SERIES User Manual

Eliminating minor faults yourself

Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following information.
Customer service will charge you for advice – even if the appliance is still under guarantee!
Appliance
Fault
Appliance has no refrigeration capacity.
The light does not work.
The display does not illuminate.
The refrigeration unit is switching on
more frequently and for longer.
The light (LED) does not work.
Display indicates "E..".
Display indicates "LOWPOWER".
Display indicates "HIGHVOLT".
Possible cause
Appliance has been switched off.
Power failure.
The fuse has been switched off.
The mains plug has not been inserted properly. Check whether the mains plug is secure.
Appliance opened frequently.
The ventilation openings have been covered.
Large quantities of fresh food are placed
in the freezer.
The LED lamp is defective.
Light switch is jammed.
Electronics have detected a fault.
The mains voltage falls below the permitted
limiting value.
The mains voltage exceeds the permitted
limiting value.
Remedial action
Press the On/Off button.
Check whether the power is on.
Check the fuse.
Do not open the appliance unnecessarily.
Remove obstacles.
Activate super cooling.
Call customer service.
Check whether it can be moved.
Call customer service.
When the mains voltage reaches the stipulated value
again, the warning message goes out. If the warning
message lasts for longer, inform the energy supply
company.
When the mains voltage reaches the stipulated value
again, the warning message goes out. If the warning
message lasts for longer, inform the energy supply
company.
en
15