Cushion Seal Fitting Tips
If you experience leaks,
1.
try a different size cushion.
2.
Verify that the support band is not
overtightened on your chin.
3.
Move the headgear to a different slot on
the interface.
4.
rotate the cushion forward or backward
on the attachment hub.
5.
re-adjust the mask fitting while lying
down.
6.
review tube Management suggestions for
additional tips.
Removing the Headgear and
Interface
You can quickly and easily remove the
interface by grabbing the back headgear strap
and sliding it forward over your head.
InstructIons for use
15