Table of Contents
Advertisement
The charger may stop functioning when charging at 0 °C or
less.
•
The main unit may become warm during use and charging.
However, this is normal.
•
Use the EW‑DL40 toothbrush with the RE8‑4 charger only.
►
Mountingthechargertothewall
1. Attach two screws
to the wall as
25mm
illustrated.
•
Please be careful
as to not drill a
cable or water
pipe in the wall.
•
Screws and
anchors are sold
separately.
. Hook the charger onto these screws.
. Plug the power cord into a household outlet.
AbouttheLEDdisplay
When the battery
While charging
capacity is low
The battery
The charge status
capacity lamp
lamp glows.
blinks.
4
28mm
After charging is
completed
The charge status
lamp glows.
The battery capacity
lamp blinks.
Use
Usingthetoothbrush
1
1
Placethebrushfirmlyonto
thetoothbrushshaft.
•
There will be a small gap
between the brush and the main
unit.
2
2
Placethetoothbrushinyour
mouthbeforeturningiton.
•
Apply a small amount of
toothpaste to the brush, if
desired, before turning the power
on to prevent the toothpaste from
spattering.
3
3
Pressthemodeselectortoselect
themode.
•
Pressing the mode selector toggles the
operation mode between "POWERFUL"
and "SOFT".
Mode
Description
For standard brushing
Brush moves horizontally only.
When teeth or gums are sensitive.
When brushing in the POWERFUL
mode is too strong.
Brush moves horizontally only.
Advertisement
Table of Contents
