Removing The Solid-State Drive; Prerequisites; Procedure - Dell Aurora R6 Service Manual

Removing the solid-state drive

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
CAUTION: Solid-state drives are fragile. Exercise care when handling
the solid-state drive.
CAUTION: To avoid data loss, do not remove the solid-state drive
while the computer is in sleep or on state.

Prerequisites

1 Remove the
2 Follow the procedure from step 1 to step 4 in
unit".
3 Remove the

Procedure

1 Locate the solid-state drive slot on the system board. For more information,
see "System-board
2 Remove the screw that secures the solid-state drive to the system board.
76
left-side cover.
graphics card.
components".
computer. After working inside your
After working inside your
"Removing the power-supply