TABLE OF CONTENTS
Specifications ........................................................................... 1
4-2. Printed Wiring Boards .............................................. 10
4-3. Schematic Diagram ................................................... 13
MODEL IDENTIFICATION
MICROCASSETTE-CORDER M-100MC
Indication of country of origin :
US, Canadian, AEP, E, Tourist model
No indication of country of origin : 1E model
Flexible Circuit Board Repairing
•
Keep the temperature of the soldering iron around 270°C
during repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when
soldering or unsoldering.
Notes on chip component replacement
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be
damaged by heat.
.................................... 19
- 2 -
SECTION 1
GENERAL
LOCATION AND FUNCTION OF CONTROLS
1 P PAUSE switch
2 CUE MARKER button
3 VOL control
4 REC indicator
5 Microphone
6 Speaker
7 SENSITIVITY selector
8 BATT indicators and i indicator
9 r (recording) button
!º ( (playback) button
!¡ ) (fast-forward)/(cue) • 0 (rewind)/(review) switch
!™ VOR switch
!£ FIRST PB switch
!¢ Handstrap
!∞ TAPE SPEED switch
!§ EAR jack
!¶ DC IN 3V jack
!• p, (stop/eject) button
!ª TAPE COUNTER