Smartconsole Utility; Additional Information; Telnet Management - D-Link DGS-1210-28P Getting Started Manual

Step 4
Before entering the Web-based Management, the Smart
Wizard will guide you to quickly configure some functions,
such as Password Settings, SNMP Settings, and
System Settings. If you don't plan to change anything,
click Exit to exit the Wizard and enter the Web-based
Management. For a detailed look at the Smart Wizard's
functions, please refer to the Smart Wizard introduction
in the user manual.

SmartConsole Utility

The SmartConsole Utility included on the installation CD is
a program for discovering Smart Switches with the same
L2 network segment connected to your PC. This tool is
only for computers running Windows 2000, Windows XP,
and Windows Vista x64/86 operating systems. There are
two options for the installation of SmartConsole Utility,
one is through the autorun program on the installation CD
and the other is manual installation.
Note: Please be sure
SmartConsole Utility from your PC before installing the
latest SmartConsole Utility.
Option 1: Follow these steps to install the
SmartConsole Utility via the autorun program
on the installation CD.
1. Insert the Utility CD into your CD-Rom Drive.
2. The autorun program will pop up automatically
3. Simply click on the "Install SmartConsole Utility"
button and an installation wizard will guide you
through the process.
4. After successfully installing the SmartConsole Utility,
you can open the utility by clicking Start > Programs
> D-Link SmartConsole Utility.
5. Just connect the Smart Switch to the same L2 network
segment of your PC and use the SmartConsole
Utility to discover the Smart Switches.
Option 2: Follow these steps to install the
SmartConsole Utility manually.
1. Insert the Utility CD into your CD-Rom Drive.
2. From the Start menu on the Windows desktop, choose
Computer.
3. Double click on your CD-Rom/DVD-Rom Drive to start
the autorun menu, or right click on the Drive to open
the folder. Select SmartConsole Utility and double
click on the .exe file.
4. Follow the on-screen instructions to install the utility.
5. Upon completion, go to Start > Programs > D-Link
SmartConsole Utility and open the SmartConsole
Utility.
6. Just connect the Smart Switch to the same L2 network
segment of your PC and use the SmartConsole
Utility to discover the Smart Switches.
4
to remove any existing
For a detailed look at SmartConsole's functions, please
refer to the SmartConsole Utility introduction in the user
manual.

Telnet Management

Users may also access the switch through Telnet using
your PC's Command Prompt. To access it from your
computer, users must first ensure that a valid connection
is made through the Ethernet port of the Switch and your
PC, and then click Start > Programs > Accessories >
Command Prompt on your computer. Once the console
window opens, enter the command telnet 10.90.90.90
(depending on configured IP address) and press Enter
on your keyboard. You should be directed to the opening
console screen for the Command Line Interface of the
switch, enter the "admin" for the default user name and
password for the Switch and press the Enter key.
SNMP-Based Management
You can manage the Switch with D-Link D-View or any
SNMP-compatible program. The SNMP function is default
Disabled for D-Link Web Smart switches.

Additional Information

If you are encountering problems setting up your network,
please refer to the user manual that came with the switch.
It contains many more rules, charts, explanations, and
examples to help you get your network up and running.
Additional help is available through our offices listed at the
back of the user manual or online. To find out more about
D-Link products or marketing information, please visit the
website http://www.dlink.com.tw; for any support issue,
please visit the website http://support.dlink.com.tw, which
will re-direct you to appropriate local D-Link website.
Warranty Information
The D-Link Limited Lifetime Warranty information is
available at http://warranty.dlink.com/