Menu Item
Service ID
Enabled
Line Offset
Audio Slot
Menu Item
Group, Slot <-
Audio Ch
Subtitles
This menu allows you to configure the type of sub titling (for example, DVB or Imitext)
displayed by the receiver, and how the receiver displays subtitling on the TV.
Description
Displays the service available in
SDI.
Select whether the selected service
is enabled or disabled in the SDI
output.
Note: If services are not present,
they will not be sent to the output.
Set the offset number from the
Switch line parameter displayed in
the SDI - Global menu. For more
information, see SDI - Global (on
page 57).
Note: The SMPTE standard
recommends two as the minimum
supported line offset.
Description
This selects the audio channel
grouping, and audio channels from
the available audio group.
Parameters
EIA-708, AFD, DPI, SMPTE-
2031, Multi-OP47, and SDP-
OP47
Yes or No
Parameters
Group: This the channel group
- 1 to 4.
Slot: This is the HANC
position - 1 to 4.
Audio: This is the audio source
- 1, 2.
Ch: This is the source audio
channel - left, right.
Setup Menu
105