Dell DL1000 Deployment Manual page 50

4. Click Next.
5. Enter a name for the team and click Next.
6. Select the Team Type and click Next.
7. Select an adapter you want to be part of the team, and click Add.
8. Repeat these steps for all other adapters that are a part of the team.
9. When all adapters are selected for the team, click Next.
10. Select a standby NIC if you want a NIC that can be used as the default, if the team fails.
11. Select whether to configure LiveLink, and then click Next.
12. Select Skip Manage VLAN and click Next.
13. Select Commit changes to system and click Finish.
14. Click Yes when warned that the network connection is interrupted.
NOTE: Building of the NIC team may take approximately five minutes.
50