Deletion Of Log Files; System Requirements For Dett - Philips MPX2 Instructions For Use Manual

2 DETT - Instructions for Use

Deletion of Log Files

DETT generates log files when connected to an IntelliVue monitor.
Logfiles are marked as "*.txt" - Files with DevIFTest as prefix, e.g.
DevIfTest_20100222_103626_COM1_115200.txt
To delete the log files, manually delete the files that are either stored in the default program directory
or the selected log files path (refer to "File -> Configuration").
As the log files can take up a considerable amount of disk space we recommend that you delete the log
files when they are no longer needed.

System Requirements for DETT

To use the DETT, your PC must fulfill these minimum requirements:
• Processor: 1 GHz or better is required
• Installed Memory: 512 MB RAM (required), 1GB (recommended).
• Free hard disk space:
About 2 MB for the zip file and less than 10 MB for the extracted tool excl. stored log files.
NOTE
Future releases of the DETT may require more hard disk space.
• Network Interface Card with 10BaseT half-duplex. It is recommended that you install the latest
driver available for your Network Card.
• RS-232 interface to communicate with the IV MIB/RS-232 interface or support of an USB/ RS-
232 converter
• Super VGA monitor with at least 800 x 600 pixels screen resolution (required), 1024 x 768 or
better (recommended).
• Operating System: Windows XP (32 bit version), Windows Vista (32-bit version) or Windows 7
(32- and 64-bit version).
Other compatible operating systems have not been tested.
.NET Framework 3.5 is required
NOTE
Windows Vista and Windows 7 should use 96 DPI (100%) as screen resolution to avoid DETT menu
text to be shortened or compressed.
8