1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-X600 series
  6. Service manual

Hitachi CP-X600 Service Manual

Hide thumbs Also See for CP-X600:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual, User Manual

SERVICE MANUAL

Warning
The technical information and parts shown in this
manual are not to be used for: the development,
design, production, storage or use of nuclear, chemical,
biological or missile weapons or other weapons of
mass destruction; or military purposes; or purposes that
endanger global safety and peace. Moreover, do not
sell, give, or export these items, or grant permission for
use to parties with such objectives. Forward all inquiries
to Hitachi Ltd.
Be sure to read this manual before servicing. To assure safety from fi re, electric shock, injury, harmful
radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be
sure to read cautionary items described in the manual to maintain safety before servicing.
1. When replace the lamp, to avoid burns to your fi ngers. The lamp becomes too hot.
2. Never touch the lamp bulb with a fi nger or anything else. Never drop it or give it a shock. They may
cause bursting of the bulb.
3. This projector is provided with a high voltage circuit for the lamp. Do not touch the electric parts of
power unit (circuit) and power unit (ballast), after turn on the projector.
4. Do not touch the exhaust fan, during operation.
5. The LCD module assembly is likely to be damaged. If replacing to the LCD LENS/PRISM assembly,
do not hold the FPC of the LCD module assembly.
6. Use the cables which are included with the projector or specifi ed.
1. Features ------------------------------------------------------ 2
2. Specifi cations ----------------------------------------------- 2
3. Names of each part ---------------------------------------- 3
4. Adjustment --------------------------------------------------- 6
5. Troubleshooting ------------------------------------------ 13
6. Service points --------------------------------------------- 18
7. Wiring diagram -------------------------------------------- 33
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
Multimedia LCD Projector
YK
CP-X600(EDX40K3)
Caution
Service Warning
Contents
8. Disassembly diagram ----------------------------------- 42
9. Replacement parts list ---------------------------------- 51
10.RS-232C communication ------------------------------- 52
11. Block diagram --------------------------------------------- 63
12. Connector connection diagram ----------------------- 64
13.Basic circuit diagram ------------------------------------ 65
May 2007
No.0586E

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-X600

Summary of Contents for Hitachi CP-X600

  • Page 1: Table Of Contents

    Be sure to read this manual before servicing. To assure safety from fi re, electric shock, injury, harmful radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be sure to read cautionary items described in the manual to maintain safety before servicing.

  • Page 2: Features

    CP-X600(EDX40K3) 1. Features • High Brightness • Low Noise • Rich Connectivity 2. Specifications Drive system TFT active matrix Liquid crystal Panel size 2.0cm(0.79 type) panel Number of pixels 1024 (H) x 768 (V) Lamp 285W UHB Video : Analog 0.7Vp-p(75Ω termination) RGB IN H/V.

  • Page 3: Names Of Each Part

    CP-X600(EDX40K3) 3. Names of each part Projector HOT! (1) Speakers (x 2) (2) Focus ring (16) (3) Zoom ring (4) Lamp cover The lamp unit is inside. (12) (5) Front cover HOT! (6) Lens (7) Lens cover (11) (8) Remote sensors (x 3)

  • Page 4: Control Panel

    CP-X600(EDX40K3) Control panel (1) STANDBY/ON button (2) MENU button It consists of four cursor buttons. (3) INPUT button (4) POWER indicator (5) TEMP indicator (6) LAMP indicator Rear panel (1) Shutdown switch (2) Security slot (3) Security bar (4) AC inlet...

  • Page 5: Remote Control

    CP-X600(EDX40K3) Remote control (1) VIDEO button (2) RGB button (3) SEARCH button SEARCH VIDEO (4) STANDBY/ON button ASPECT AUTO BLANK (inactive) (inactive) (10) MAGNIFY (5) ASPECT button PAGE UP HOME VOLUME (11) (6) AUTO button PAGE DOWN MUTE (inactive) (inactive)

  • Page 6: Adjustment

    CP-X600(EDX40K3) 4. Adjustment 4-1 Before adjusting 4-1-1 Selection of adjustment When any parts in the table 4-1 are changed, choose the proper adjusting items with the chart. Table 4-1: Relation between the replaced part and adjustment Adjustment Replaced White Color...
  • Page 7 CP-X600(EDX40K3) 4-2 Flicker adjustment (V.COM adjustment) Test pattern for the adjustment Adjustment procedure 1. Use DAC-P - V.COM - R: in the FACTORY MENU to adjust so that the flicker at the center of the screen is less than the flicker at the periphery.
  • Page 8 CP-X600(EDX40K3) 4-5 E-POS adjustment (vertical bars adjustment 2) Test pattern for the adjustment Adjustment procedure 1. Make this adjustment after completing the ad- justment in the section 4-4. 2. Use DAC -P - E-POS - R in the FACTORY MENU and use it so that vertical bars are minimized.
  • Page 9 CP-X600(EDX40K3) 4-7 Color uniformity adjustments Preparations 1. Perform these adjustments after the adjustments 5. Adjustment point No.1 should not be adjusted, described in the section 4-6. because it controls the brightness of the entire 2. Make a color uniformity adjustments for the screen.
  • Page 10 CP-X600(EDX40K3) Adjustment procedure 1 (When a color differential meter is used) Note: Since excessive correction may lead to a 1. First adjust the [MID-1] tone [G:]. correction data overview during internal 2. Select adjustment point [No.2][G:]. calculations, use the following values for When the background is not [G] monochrome, reference.
  • Page 11 CP-X600(EDX40K3) Adjustment procedure 2 (visual inspection) 1. First adjust [MIN] tone [G:]. Adjustment technique: 2. Select [No.2] [G:]. First, adjust [B:] of the point whose color is to If the background is [G] monochrome, press the be adjusted so that it approximates that of [ENTER] key on the remote control to switch to [No.1].
  • Page 12 CP-X600(EDX40K3) 4-8 Adjusting the zoom and focus Focus ring Zoom ring 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture.

  • Page 13: Troubleshooting

    CP-X600(EDX40K3) 5. Troubleshooting Check points P501 P701 EE01...
  • Page 14 CP-X600(EDX40K3) Power can not be turned on *: Be sure to unplug the power cord before measuring resistance. voltage Measure supplied at pins resistance* between 0Ω (9),(12) and (14) of E800 on pins (9) and (14), and PWB assembly MAIN...
  • Page 15 CP-X600(EDX40K3) Lamp does not light *: Be sure to unplug the power cord before measuring resistance. What is the state of Light LAMP indicator DK03 during operation? the LAMP installation install the Lamp correct? Not light Is the voltage at the...
  • Page 16 CP-X600(EDX40K3) Picture is not displayed when the RGB signal is input Confirm the splash screen the LCD Panels CPC36 connector and the user menu displayed connection to the MAIN correctly? board. PWB assembly MAIN LCD/Lens prism assembly Is the picture from RGB...
  • Page 17 CP-X600(EDX40K3) No sound Check at operating mode (Make sure the state of MUTE , Volume and AUDIO-SPEAKER) Disconnect the speaker from the infinity PWB assembly Main and Speaker measure its resistance. about 8 PWB assembly Main PWB assembly INPUT Can not control to RS-232C The check after parts change 1.

  • Page 18: Service Points

    CP-X600(EDX40K3) 6. Service points 6-1 Lead free solder [CAUTION] This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions before attempting any soldering work. CAUTION Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder can splatter at high temperatures (600˚C).
  • Page 19 Therefore, regarding these parts, you can either replace part, LCD/Lens prism assembly, or send the whole unit LCD/Lens prism assembly back to HITACHI, where we will replace the malfunctioning part, recondition the device and send it back to you.
  • Page 20 CP-X600(EDX40K3) (4) Unscrew PWB assembly MAIN to make it free and disconnect the LCD panel flexible cables. Remove these screws Remove these 9 screws Flexible cables of LCD panel (5) Press and hold the switch S941 using an insulator during maintenance.
  • Page 21 CP-X600(EDX40K3) 3. Maintenance point Swab Each color part has same construction. By using swab and air duster, you can easily remove dust from panel and opti- cal filter. Panel Holder Optical filter 4. Cleaning the panels and optical filters (1) Turn on the set and lit on the lamp.

  • Page 22: Putting Batteries

    CP-X600(EDX40K3) 6-4 Putting batteries WARNING Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environ- ment.

  • Page 23: Air Filter

    CP-X600(EDX40K3) 6-5 Air filter WARNING • Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool suffi ciently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector.
  • Page 24 CP-X600(EDX40K3) 6-6 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ● The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different life- time, and some may burst or burn out soon after you start using them.
  • Page 25 CP-X600(EDX40K3) Replacing the Lamp A lamp has a fi nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after being started using.

  • Page 26: Other Care

    CP-X600(EDX40K3) 6-7 Other care WARNING Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool suffi ciently. The care in a high temperature state of the projector could cause a burn and/ or malfunction to the projector.
  • Page 27 CP-X600(EDX40K3) 6-8 Notice of AUTO adjustment Use of AUTO adjustment with the image through RGB input optimizes V_POSI, H_POSI, H_SIZE and H_PHASE automatically. In case that projected image has dark tone around its peripheral, AUTO operation sometimes makes artifacts in the image, shifts capture area and so on. Those failures are caused by period of image data is not exactly distinguished to period of blanking on signal processing.
  • Page 28 CP-X600(EDX40K3) 6-9 How to inactivate the security functions This projector is equipped with security functions. (1)MyScreen PASSWORD The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten.
  • Page 29 PIN BOX (ID Inquiring Code) 2. Send HITACHI sales company the Inquiring code (10 digits) to inquire the correct PIN code. 3. With the PIN BOX menu displayed, input the correct PIN code. Enter the correct PIN CODE that HITACHI sales company informed.

  • Page 30: Related Messages

    CP-X600(EDX40K3) 6-11 Related Messages When the unit’s power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.

  • Page 31: Regarding The Indicator Lamps

    CP-X600(EDX40K3) 6-12 Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the mean- ings as described in the table below. Please respond in accordance with the instructions within the table.
  • Page 32 CP-X600(EDX40K3) 6-13 HIDDEN SERVICE MENU To display the OSD for “HIDDEN SERVICE MENU” set up. By the control panel By the remote control transmitter HIDDEN SERVICE AIR-SENSOR EXECUTE 1. Display the Advanced menu by 1. Display the menu by the...

  • Page 33: Wiring Diagram

    CP-X600(EDX40K3) 7. Wiring diagram...
  • Page 34 CP-X600(EDX40K3)
  • Page 35 CP-X600(EDX40K3)
  • Page 36 CP-X600(EDX40K3)
  • Page 37 CP-X600(EDX40K3)
  • Page 38 CP-X600(EDX40K3)
  • Page 39 CP-X600(EDX40K3)
  • Page 40 CP-X600(EDX40K3)
  • Page 41 CP-X600(EDX40K3)

  • Page 42: Disassembly Diagram

    CP-X600(EDX40K3) 8. Disassembly diagram...
  • Page 43 CP-X600(EDX40K3)
  • Page 44 CP-X600(EDX40K3) Notice 1. Detach and attach the upper case. Follow the procedure below to detach and attach the upper case. When disassembling a. Remove the Lamp door. CAUTION The lamp door must be removed before the upper case when disassembling the machine. If the upper case is detached with the lamp door installed, the MAIN board might be damaged.
  • Page 45 CP-X600(EDX40K3) (2) Remove 2 screws on the front. (3) Remove the front cover. front cover Set the lever to the center 2 screws Match the dent with the lever. c. Remove 9 screws on the bottom and 2 screws on the rear to detach the upper case.
  • Page 46 CP-X600(EDX40K3) When assembling a. Tighten 9 screws on the bottom and 2 screws on the rear after attaching the upper case with the lamp door separated. In order not to make a gap between the upper and the bottom cases, tighten these screws while pressing down the upper case in the direction of the arrow.
  • Page 47 CP-X600(EDX40K3) c. Attach the Lamp door. Lamp door CAUTION Tighten this screw using a manual screwdriver. 2. Replacing the power units. Remove the screw to take off the duct. Remove the 3 screws to take off the power unit. NOTE : One of screws is behind the duct.
  • Page 48 CP-X600(EDX40K3) 3. Detaching and attaching the Panel Fan Duct assembly When disassembling Remove 6 screws and unhook the panel fan duct assembly as shown in the diagram. Panel fan duct assembly When assembling Tighten 6 screws and hook the panel fan duct assembly.
  • Page 49 CP-X600(EDX40K3) 4. Attaching the dichroic optics unit ④ Put the dichroic optics unit on the bottom case, and tighten screws in order of 1, 2, 3 and 4 as shown in the diagram. ② ① ③ power unit fan 5. Replacing the power unit fan Be sure to do the following works before changing the power unit fan.
  • Page 50 CP-X600(EDX40K3) 7. Assembling the power unit CAUTION Make sure that power unit board was fi xed by 4 hooks of PWB HOLDER. Make sure that it is hard to remove. Cross Section 8. Assembling the FOOT MTL Remove the remote board first when assembling the FOOT MTL.

  • Page 51: Replacement Parts List

    CP-X600 SYMBOL PARTS DESCRIPTION SYMBOL PARTS DESCRIPTION 1 QD58122 UP CASE ASS CP-X600 30 JP50854 EDX PWB ASS'Y INPUT 2 PC06761 CONT B ASSY EDX40 31 JP50855 EDX PWB ASS'Y CONTROL 3 QD52933 LAMP DOOR ASSY EDX40 32 JP50856...

  • Page 52: Rs-232C Communication

    CP-X600(EDX40K3) 10. RS-232C communication RS-232C Communication CONTROL port RS-232C cable (Cross) RS-232C port of the projector of the computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6)
  • Page 53 CP-X600(EDX40K3) RS-232C Communication (continued) Requesting projector status (Get command) (1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+ ‘00H’ +‘00H’) from the computer to the projector. (2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

  • Page 54: Command Data Chart

    CP-X600(EDX40K3) Command data chart RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code Power Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2...
  • Page 55 CP-X600(EDX40K3) RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code User Gamma Pattern BE EF 06 00 FB FA 01 00 80 30 00 00 9 step gray scale BE EF 06 00 6B FB 01 00...
  • Page 56 CP-X600(EDX40K3) RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP GAIN B BE EF 06 00 8C F5 02 00 B3 30 00 00 Increment BE EF 06 00 EA F5 04 00 B3 30...
  • Page 57 CP-X600(EDX40K3) RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code ASPECT BE EF 06 00 9E D0 01 00 08 20 00 00 16:9 BE EF 06 00 0E D1 01 00 08 20 01 00...
  • Page 58 CP-X600(EDX40K3) RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code RGB 1 SYNC ON G OFF BE EF 06 00 5E D7 01 00 10 20 02 00 SYNC ON G ON BE EF 06 00...
  • Page 59 CP-X600(EDX40K3) RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code MUTE TURN OFF BE EF 06 00 46 D3 01 00 02 20 00 00 TURN ON BE EF 06 00 D6 D2 01 00 02 20...
  • Page 60 CP-X600(EDX40K3) RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code LANGUAGE ENGLISH BE EF 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 06 00 67 D2 01 00 05 30 01 00...
  • Page 61 CP-X600(EDX40K3) RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code AUTO SEARCH TURN OFF BE EF 06 00 B6 D6 01 00 16 20 00 00 TURN ON BE EF 06 00 26 D7 01 00...
  • Page 62 CP-X600(EDX40K3) RS-232C Communication (continued) Command Data Names Operation Type Header Action Type Setting Code MY BUTTON-2 RGB1 BE EF 06 00 C6 32 01 00 01 36 00 00 RGB2 BE EF 06 00 06 30 01 00 01 36...

  • Page 63: Block Diagram

    CP-X600(EDX40K3) 11. Block diagram...

  • Page 64: Connector Connection Diagram

    CP-X600(EDX40K3) 12. Connector connection diagram C.VIDEO EC03 EC01 CNVID EV01 E301 1 SENSER C-Video 3 Y(S-Video) Cb/Pb 4 C(S-Video) 4 E801 FAN1S AUDIO-3 L Vcc(Cont） （PANEL-R/G) Cb/Pb Cr/Pr AUDIO-3 R P501 LCCOM EC02 EA06 P601 AUDIO-4 L Audio-3_R P701 Audio-3_L...

  • Page 65: Basic Circuit Diagram

    CP-X600(EDX40K3) 13. Basic circuit diagram Parts with hatching are not mounted. CONFIDENTIAL APU5 APUM APUP ET21 UBB-4R-D14C ET03 PH-03V-D RS232C ET01 3175-09M ET02 APRD APTD APT6 PH-05V-D USB D- USB D+ APT4 APSG GND1 PWB assembly CONTROL APL1 APL3 LL36...
  • Page 66 CP-X600(EDX40K3) CONFIDENTIAL FRONT-56 FRONT-38 UP-56 UP-38 *IR04 IR03 *IR02 IR01 KSM-2003LM2EL KSM-2003LM2EL KSM-2003LM2EL KSM-2003LM2EL Vout Vout Vout Vout *CR10 CR07 *CR04 100p-C 100p-C 100p-C *RR08 RR02 2125 2125 CR01 100p-C ER01 ZH-06H PWB assembly REMOTE E941 S941 ZH-02H AP91 AV34423...
  • Page 67 CP-X600 ( EDX40K3 ) CONFIDENTIAL POWER UNIT (BALLAST) 1...
  • Page 68 CP-X600 ( EDX40K3 ) CONFIDENTIAL POWER UNIT (BALLAST) 2...
  • Page 69 CP-X600 ( EDX40K3 ) CONFIDENTIAL DC IN+ D201 C200 FB105 C108 T201 L102 L103 DC IN- IC200 D102 ICP200 R200 C202 CN104 FB106 D200 1 14.5V C201 R244 R245 R201 R111 C204 2 14.5V R125 C117 C203 C104 FB101 R202...
  • Page 70 CP-X600 ( EDX40K3 ) CONFIDENTIAL F101 C101 L101 C100 R100 C103 L100 C102 POWER UNIT (CIRCUIT) 2...
  • Page 71 CP-X600 ( EDX40K3 ) CONFIDENTIAL EC03 YKC21-4673V APC20 CVBS LC01 NFL21SP407X1C3 2125 APC21 LC02 R1(SW) APC22 1608 APC23 APC24 LC03 NFL21SP407X1C3 2125 LC04 APC51 APC52 LC09 EC01 1608 NFL21SP407X1C3 ZH-09V APC1 2125 LC10 NFL21SP407X1C3 CVBS APC2 2125 APC25 LC05 APC3...
  • Page 72 CP-X600 ( EDX40K3 ) CONFIDENTIAL TEMP DK02 SML-210VT RK23 QK23 1005 DTC114EUA EK01 ZH-12H RK01 APY01 KEYO-0 LAMP DK03 RK02 APY02 SML-210VT KEYO-1 RK24 APY03 QK24 DTC114EUA 1005 RK04 APY04 KEYI-0 RK05 APY05 KEYI-1 RK06 APY06 KEYI-2 RK07 APY07 QK22...
  • Page 73 CP-X600 ( EDX40K3 ) CONFIDENTIAL C2H1 C2H2 18p-C 15p-C 1005 1005 R2R8 R2N1 1.0K RESETN R215 1005 1005 R2N2 1.0K 1.0K 1.0M Q201 I201 1005 1005 DTC114EE MISC PW288B-10L R216 EMU-RESET L201 600 R2F0 I201 RESETB 1005 1608 R240 INPUT PORT 0...
  • Page 74 CP-X600 ( EDX40K3 ) CONFIDENTIAL L251 65mA +3.3V 1608 N251 R263 I251 1.0K-1% 1005 S29AL016D70TFI010 I201 MAIN MEMORY PORT PW288B-10L GND1 BYTE# MVREF MREFIN0 R254 C253 C262 I252 I253 Vss-46 MREFIN1 R2E3 0.1/10 0.1/10 EDD2516AKTA-6B EDD2516AKTA-6B R266 1005 MCK0 2010...
  • Page 75 CP-X600 ( EDX40K3 ) CONFIDENTIAL 38_REAR 56_REAR I001 *I002 KSM-2003LM2EL KSM-2003LM2EL Vout Vout *C004 R001 100p-C +3.3V C001 100p-C R308 S310 +6.6V 1005 6.6V I301 SKHHLMA010 S-80950CNMC-G9LT2G 3.3V R311 3.3V R303 3.3V RESETN Q302 R309 I302 1005 DTC114EE SN74LVC1G97DCK R306...
  • Page 76 CP-X600 ( EDX40K3 ) CONFIDENTIAL I801 I808 SI-3010KM BD00KA5WFP-E2 L8A1,L802-805 1.2V-TG L816 15.5V-Panel C823 +4.0V 0.033/16 1.8V-CPU C6-K3LA +17V +1.8VCPU FANGND 1005 I807 FAN15V TPS40222DR 3.3V-Panel 3.3V-CPU PVIN R829 (AUDIO POWER SUPPLY) L8A1 E806 APP7 C1V222-2A AVIN PH-05V 1005 3216 1.8V-CPU...
  • Page 77 CP-X600 ( EDX40K3 ) CONFIDENTIAL I401 L401 L3E07110K0A L3E07110K0A 1/4 2518 +3.3VP +1.2V VDD1-D7 L402 VDD1-D8 C421 2.2/6.3 VDD1-D9 2518 VDD1-D10 HRESET0 CHHRST C422 VDD1-D11 VRESET0 CHVRST 0.01/16 VDD1-D12 HPLL CHHPLL 1005 VDD1-D13 CLP1 CHCP1 C423 R442 VDD1-E7 CLP2 CHCP2 0.01/16...
  • Page 78 CP-X600 ( EDX40K3 ) CONFIDENTIAL EDX R Panel Part +3.3VP +15.5V SHCLKR SHCLKR DIRXR DIRXR ENBXR1 ENBXR1 ENBXR5 P501 ENBXR5 54104-36HUp DXOUTR DXOUTR CLXOUTR CLXOUTR DYOUTR APR36 DYOUTR CLYOUTR RLCCOM CLYOUTR LCCOM ENBYR1 APR35 ENBYR1 ENBYR2 ENBYR2 VDDY APR34 XFRR...
  • Page 79 CP-X600 ( EDX40K3 ) CONFIDENTIAL EDX G Panel Part +3.3VP +15.5V SHCLKG SHCLKG DIRXG DIRXG ENBXG1 ENBXG1 ENBXG5 P601 ENBXG5 DXOUTG 54104-36HUp DXOUTG CLXOUTG CLXOUTG DYOUTG APG36 DYOUTG CLYOUTG GLCCOM CLYOUTG LCCOM ENBYG1 APG35 ENBYG1 ENBYG2 ENBYG2 VDDY APG34 XFRG...
  • Page 80 CP-X600 ( EDX40K3 ) CONFIDENTIAL EDX B Panel Part +3.3VP +15.5V SHCLKB SHCLKB DIRXB DIRXB ENBXB1 P701 ENBXB1 54104-36HUp ENBXB5 ENBXB5 DXOUTB DXOUTB CLXOUTB CLXOUTB DYOUTB APB36 DYOUTB CLYOUTB BLCCOM CLYOUTB LCCOM ENBYB1 APB35 ENBYB1 ENBYB2 ENBYB2 VDDY APB34 XFRB...
  • Page 81 CP-X600 ( EDX40K3 ) CONFIDENTIAL R186 1005 RESETN R103 100 1 R102 I2CCLK R171 100 1 1005 I2CDAT 1005 1005 R172 4.7K LPF_RGB 1005 R173 4.7K LPF OFF 1005 LPF ON R140 LPF_RGB R187 1005 R141 1005 IN1CST R142 1005...
  • Page 82 CP-X600 ( EDX40K3 ) CONFIDENTIAL HV_Sel Wireless(In1) VideoDecorder(In0) Buffer D+3.3V IV07 SN74LVC1G126DCK TV06 D+1.5V D+3.3V RV51 LV07 CV66 CV67 LV06 CV69 0.1/10 CV08 CV68 2518 CV07 0.1/10 0.1/10 0.1/10 1005 2518 0.1/10 10/10 1005 1005 1005 1005 1005 2125 LV01 CV81 0.1/10...
  • Page 83 CP-X600 ( EDX40K3 ) CONFIDENTIAL DDCDATA DDCCLK RGB1_VS APIGD1 ES01 3114-15FA APICK1 LS18 LS01 SC200JT 2518 SYNC APIV1 2125 GND1 VCLK APIB1 LS04 SC200JT PLUG APIH1 2125 RGB IN 1 CS03 10/10 APIG1 GND1 LS05 SC200JT 2125 CS23 APIDA1 2125...
  • Page 84 CP-X600 ( EDX40K3 ) CONFIDENTIAL DG11 *RGB2 RB521G-30 3.3V 2010 3.3V *DG12 I0RO7 3.3V 3.3V RB521G-30 5.0V 3.3V 3.3V I0RO6 DDC_5V 3.3V 3.3V I0RO5 *RG77 5.0V 5.0V I0RO4 0.8V 3.3V 3.3V I0RO3 RG13 RG73 3.3V 3.3V 1005 CG40 *CG21 3.3V 3.3V...
  • Page 85 CP-X600 ( EDX40K3 ) CONFIDENTIAL 5.0V IW02 DS14C232CM CW57 +6.6V 0.1/10 1005 Dout1 IW53 RW97 uPD168110 8.0V Rin1 3.3V 3.0V 3.3V MODE RESETB 3.3V EW04 8.0V 1005 RW04 Rout1 3.3V PH-03V 1005 8.0V 8.0V 8.0V Din1 RW17 LGND RW05 8.0V 3.3V...
  • Page 86 CP-X600 ( EDX40K3 ) CONFIDENTIAL 3.3V Sheet 1 Sheet 1 SP_OFF 14.5V Sheet 4 +14.5V CA99 47/25 8.5V MVK/SKV Audio Power GND TP007 TP001 4.4V P_GND RAK0 0.0V 0.0V 8.4V 8.4V 4.4V IA01 1005 APAL1 BD3883FS 0.0V APAR1 8.5V VIN1 REC1 8.5V...
  • Page 87 CP-X600 ( EDX40K3 ) CONFIDENTIAL Hitachi ASK_Proxima +3.3V Reserved(I/F) 1005 Reserved(I/F) 0.1/10 *LE03 RE71,RE72,RE73,RE74 put side-B (soldering side) SC200JT CE16 *RE71 2125 IE03 3.3V *LE01 SN74LVC1G97DCK OEM_ID0 *REF6 1005 3.3V SC200JT 1005 2125 3.3V OEM_ID1 *LE04 *RE72 SC200JT 1005 2125...
  • Page 88 CP-X600 ( EDX40K3 ) MEMO...
  • Page 89 CP-X600(EDX40K3) Basic circuit diagram list PWB assembly CONTROL PWB assembly MAIN 4 PWB assembly BATTERY PWB assembly MAIN 5 PWB assembly REMOTE PWB assembly MAIN 6 PWB assembly SW PWB assembly MAIN 7 POWER UNIT BALLAST 1 PWB assembly MAIN 8...
  • Page 90 CP-X600 YK No.0586E QR72691 Printed in Japan (JE)

This manual is also suitable for:

Edx40k3

Table of Contents