Toshiba SBK1 User Manual page 12

3D SOUND BAR SB1
Using the LINE IN jack
1. Connect a 3.5mm - RCA audio cable (provided with the sound bar) from
the LINE IN jack on the sound bar to the LINE OUT jack on an audio
device.
You can connect to the TV by using one of the cables below:
NOTE
3.5mm - RCA audio cable (provided with the sound bar)
■
3.5mm - 3.5mm audio cable (not provided)
■
2 Press the INPUT button on the sound bar or the remote control to
switch to the LINE IN input.
Using the OPTICAL jack
1. Connect an optical cable (not provided) from the OPTICAL jack on the
sound bar to the OPTICAL OUT jack on a TV, DVD or other audio
device.
(Sample Illustration) Optical cable connection
2 Press the INPUT button on the sound bar or the remote control to
switch to the OPTICAL input.
The sound bar is designed to support PCM (Pulse-code modulation) digital
NOTE
signal only. To set the audio signal from external sources (e.g. Blu-ray™
and DVD player), please do not select "DTS" or "Dolby Digital". Otherwise,
there will be no sound from the sound bar.
EN-12
3.5mm to RCA audio coble (supplied)
(Sample Illustration) 3.5mm audio cable connection
Digital optical cable (not supplied)
User's Manual