The cyber-shot t10 - for detail like no other - a stylish and super slim digital camera with double 'anti-blur' technology - combining a super steadyshot optical image stabiliser and high sensitivity, as well as 7.2 effective megapixels, zeiss 3x optical (116 pages)
Page 2
SPECIFICATIONS Camera BC-CS3 battery charger [Input and Output connectors] Multi connector Power requirements: AC 100 to 240 V, 50/60 Hz, [System] USB communication: Hi-Speed USB (USB 2.0 3.2 W Image device: 7.20 mm (1/2.5 type) color CCD, compliant) Output voltage: DC 4.2 V, 500 mA Primary color filter Operating temperature: 0 to 40°C (32 to 104°F) [LCD screen]...
Page 3
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU PUBLISHED BY SONY.
TABLE OF CONTENTS Section Title Page SERVICE NOTE 1-1. Description on Self-diagnosis Display ···························· 1-1 1-2. Process After Fixing Flash Error ····································· 1-1 1-3. Method for Copying or Erasing the Data in Internal Memory (Internal Memory/Music) ································· 1-2 1-4. Precaution on Replacing the SY-163 Board ···················· 1-3 DISASSEMBLY 2-1.
1-1. DESCRIPTION ON SELF-DIAGNOSIS DISPLAY Self-diagnosis display • C: ss: ss You can reverse the camera malfunction yourself. (However, contact your Sony dealer or local authorized Sony service facility when you cannot recover from the camera malfunction.) • E: ss: ss Contact your Sony dealer or local authorized Sony service facility.
1-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY (INTERNAL MEMORY/MUSIC) The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) Note 1: When replacing the SY-163 board, erase the data in internal memory of the board before replacement. Note 2: When replacing the SY-163 board or the IC401 on the SY-163 board, execute formatting and initialize the internal memory after replacement.
1-4. PRECAUTION ON REPLACING THE SY-163 BOARD VIDEO OUT Default Data Check If the SY-163 board is replaced, the broadcast system data setting (NTSC/PAL) might be changed. Check the default data of VIDEO OUT if destination code is right. If not, rewrite to the right value. VIDEO OUT Default Data Data Page...
2. DISASSEMBLY NOTE FOR REPAIR • Make sure that the flat cable and flexible board are not cracked of bent at the terminal. Cut and remove the part of gilt Do not insert the cable insufficiently nor crookedly. which comes off at the point. (Be careful or some •...
Page 9
HELP HELP 2-1. DISASSEMBLY EXPLODED VIEW HARDWARE LIST 2-1-1. OVERALL SECTION Follow the disassembly in the numerical order given. 1 Cabinet (Front) Assy (1-1 to 1-4) 2 Lens Block (2-1 to 2-3) 3 Control Switch Block (3-1 to 3-6) Note: High-voltage cautions Discharging the Capacitor Short-circuit between the two points with the short jig about 10 seconds.
Page 10
2-1-2. SY BOARD SECTION EXPLODED VIEW HARDWARE LIST Follow the disassembly in the numerical order given. 1 LCD Block (1-1 to 1-3) 2 SY-163 Board (2-1 to 2-8) 3 ST-131 Board (3-1 to 3-2) 1 LCD Block 1-3 (Hook) 3 ST-131 Board HELP 2-7 (Hook) 3-2 (Claw)
Page 11
2-1-3. FRAME SECTION EXPLODED VIEW Follow the disassembly in the numerical order given. 1 BT Lid Assy (1-1 to 1-2) 2 BT-029 Flexible Board (2-1 to 2-3) 1 BT Lid Assy 1-2 (Claw) HELP 1-1 (Claw) HELP Note: On installation of the BT-029 flexible board, adjust the position of the mode switch and the mode knob.
Page 12
HELP Sheet attachment positions and procedures of processing the flexible boards/harnesses are shown. ST insulating sheet SY board ST-131 board SY insulating sheet Control switch block (SW51800) Muffle sheet (530) (It pasted in the area.) hole hole Frame assembly SP insulating sheet hole SP frame fixed sheet SP frame...
Page 13
Frame assembly 0~1mm CD radiation sheet MC radiation sheet MC radiation sheet 0~0.5mm Fold MC-159 flexible board DSC-T10_L2 HELP...
Page 14
MC conductive sheet MC conductive sheet (It pasted in the area.) Note for installation of Control switch block (RL60530) and Cabinet (rear) block. Control switch block (RL60530) Position of mode knob Mode knob Cabinet (rear) block Position of mode slider Mode slider Connector Claw...
3-3. POWER BLOCK DIAGRAM ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located. MC-159 SY-163 BOARD ST-131 BOARD FLEXIBLE CN711 BOARD T001 CN703 D001 F001 L001 ACV_UNREG ACV_UNREG ST_UNREG ST_UNREG FLASH UNIT...
4-2. SCHEMATIC DIAGRAMS Link Link BT-029 FLEXIBLE BOARD CD-656 FLEXIBLE BOARD (CCD IMAGER) (BATTERY IN, MODE SWITCH) CONTROL SWITCH BLOCK ST-131 BOARD (FLASH DRIVE) (RL60530, SW51800) MC-159 FLEXIBLE BOARD (MULTI CONNECTOR) COMMON NOTE FOR SCHEMATIC DIAGRAMS DSC-T10_L2...
Page 21
4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS 4-2. SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For schematic diagrams) 1. Connection • All capacitors are in µF unless otherwise noted. pF : µ Pattern box µF.
Page 22
CD-656 FLEXIBLE BOARD Note: CD-656 flexible complete board and IC001 are not supplied, but they are included in CCD block assy. CCD IMAGER Note: Voltages of IC001 can not be measured, because this is mounted by the side of the lens. XX MARK:NO MOUNT NO MARK:REC/PB MODE R:REC MODE...
Page 23
Schematic diagrams of the SY-163 board are not shown. Pages from 4-6 to 4-11 are not shown. DSC-T10_L2...
Page 24
• Refer to page 4-3 for mark 0. ST-131 BOARD FLASH DRIVE T001 D001 FT02P80TP XX MARK:NO MOUNT NO MARK:REC/PB MODE LND020 XE_H R003 ±5% LND018 TRIGGER FLASH UNIT LND019 TRIGGER_GND C328 C006 0.047u 315V LND001 STRB_CHARGE LND021 CHARGING LND002 PGND XSTRB_FULL XE_L...
Page 25
• Refer to page 4-3 for mark 0. MC-159 FLEXIBLE BOARD BT-029 FLEXIBLE BOARD MULTI CONNECTOR BATTERY IN, MODE SWITCH XX MARK:NO MOUNT XX MARK:NO MOUNT R004 R005 R003 2200 PLAY 2200 2200 ±5% ±5% ±5% LND001 ACV_GND LND001 MODE_DIAL0 S005 STILL LND002...
Page 26
CONTROL SWITCH BLOCK (RL60530) CONTROL SWITCH BLOCK (RL60530) is replaced as block, so that PRINTED WIRING BOARD is omitted. D001 SML-412MWT86 (POWER) LND001 D_3.2V LND002 XPWR_LED S001 LND003 XPWR_ON POWER LND004 REG_GND CL001 LND005 MIC_SIG CL002 MIC901 S004 LND006 MIC_GND (SHUTTER) LND007 REG_GND...
4-3. PRINTED WIRING BOARDS Link Link CD-656 FLEXIBLE BOARD MC-159 FLEXIBLE BOARD ST-131 BOARD BT-029 FLEXIBLE BOARD COMMON NOTE FOR PRINTED WIRING BOARDS DSC-T10_L2...
Page 28
4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS 4-3. PRINTED WIRING BOARDS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS • : Uses unleaded solder. • Chip parts. • : Circuit board Transistor Diode : Flexible board Pattern from the side which enables seeing. : pattern of the rear side (The other layers’...
Page 29
CD-656 (2 layers) : Uses unleaded solder. CD-656 FLEXIBLE BOARD Note: CD-656 flexible complete board and IC001 are not supplied, but they are included in CCD block assy. C005 C004 C006 R006 IC001 R007 C007 C003 IC002 1-871-425- DSC-T10_L2 CD-656 4-17...
Page 30
Printed wiring boards of the SY-163 board are not shown. Pages 4-18 and 4-19 are not shown. DSC-T10_L2...
Page 31
ST-131 (4 layers), MC-159 (2 layers), BT-029 (1 layer) : Uses unleaded solder. ST-131 BOARD FLASH UNIT XE_L XE_H TRIGGER_GND TRIGGER R002 R001 C326 C001 CAUTION D001 C328 Danger of explosion if battery is incorrectly replaced. C328 LND019 Replace only with the same or equivalent type. LND018 CHARGING S005...
Page 32
Mounted parts location of the SY-163 board is not shown. Page 4-21 is not shown. DSC-T10_L2 4-21...
NOTE NOTE 5. REPAIR PARTS LIST NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown. EXPLODED VIEWS EXPLODED VIEWS Link Link OVERALL SECTION SY BOARD SECTION FRAME SECTION ELECTRICAL PARTS LIST Link ELECTRICAL PARTS LIST...
Page 34
5. REPAIR PARTS LIST 5. REPAIR PARTS LIST 5. REPAIR PARTS LIST NOTE: • -XX, -X mean standardized parts, so they may have some differences from When indicating parts by reference number, the original one. please include the board name. •...
5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY HARDWARE LIST 5-1. EXPLODED VIEWS 5-1-1. OVERALL SECTION ns: not supplied #18 (SILVER) #29 (BLACK) #18 (SILVER) #29 (BLACK) SY board section (See page 5-3.) #18 (SILVER) #29 (BLACK) #18 (SILVER) #29 (BLACK) (including CD-656 flexible board and IC001...
Page 36
5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY HARDWARE LIST 5-1-2. SY BOARD SECTION ns: not supplied D901 C328 LCD901 Frame section (See page 5-4.) * Refer to the table of page 5-1 about language of SY-163 board. • Refer to page 5-1 for mark 0. Ref.
Page 37
5. REPAIR PARTS LIST 5. REPAIR PARTS LIST DISASSEMBLY 5-1-3. FRAME SECTION ns: not supplied BH001 BT001 BT001 (BATTERY, LITHIUM SECONDARY) SP901 Board on the mount position (See page 4-20). CAUTION 1 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Page 39
Checking supplied accessories. Other accessories Note 1: This item is supplied with the unit as an accessory, but is not prepared as a service part. 2-691-401-01 MANUAL, INSTRUCTION (JAPANESE) (J) 2-691-401-11 MANUAL, INSTRUCTION (ENGLISH) (EXCEPT KR, CH, AR, J) 2-691-401-21 MANUAL, INSTRUCTION (FRENCH, ITALIAN) (CND, AEP) 2-691-401-31 MANUAL, INSTRUCTION (SPANISH, PORTUGUESE) (AEP, E, AR, JE) 2-691-401-41 MANUAL, INSTRUCTION (GERMAN, DUTCH) (AEP)
Page 40
HARDWARE LIST (1/3) #1: M1.7 X 2.5 #2: M1.7 X 4.0 #3: M1.7 X 2.5 #4: M1.4 X 2.5 (Tapping) (Black) (Black) (Red) (Dark Silver) 2-635-562-11 2-635-562-31 2-660-401-01 3-348-998-81 #5: M1.7 X 3.5 (Tapping) #6: M1.4 X 1.7 #7: M1.7 X 1.6 #8: M1.7 X 3.5 (Tapping) (Black) (Silver)
Page 41
HARDWARE LIST (2/3) #21: M1.4 X 3.0 #22: M1.7 X 5.0 (Tapping) #23: M1.7 X 4.0 (Tapping) #24: B1.7 X 5.5 (Tapping) (Black) (Silver) (Black) (Black) 2-662-396-21 3-083-261-01 3-080-204-11 4-679-805-11 #25: M1.7 X 3.0 #26: M1.4 X 2.0 #27: M1.4 X 2.0 #28: M1.4 X 4.0 (Tapping) (Black) (Silver)
Page 42
HARDWARE LIST (3/3) #41: M3.0 X 8.0 (Tapping) #42: M2.0 X 4.0 (Tapping) (Silver) (Silver) 3-065-748-01 7-628-253-00...
Page 43
[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)] Toolbar Printing a text Reversing the screens displayed once • To reverse the previous screens (operation) one by one, click 1. Click the Print button 2.
Page 44
Reverse 985212931.pdf Revision History S.M. Rev. Ver. Date History Contents issued 2006.07 Official Release — — DSC-T10_L2...