Hitachi PSC-5T Installation And Operation Manual page 13

CHANGING WEEKLY SCHEDULE PATTERN (A OR B)
There are 2 (two) patterns (A or B) set for the weekly schedule.
Each pattern can be set with 3 (three) times ON/OFF settings for
each weekly day.
<Function>
To select the pattern for setting and operating the schedule.
The schedule of A or B pattern can be set for each week and
changed for a season.
1. Depress the "SET/MONITOR" switch.
The control timer is changed to the setting mode and the "SET"
indication is turned on.
2. Depress the "A/B" switch.
The set pattern is changed ("A" to "B") by depressing the "A/B"
switch.
The right figure shows the case of selecting the set pattern "B".
3. Depress the "SET/MONITOR" switch.
The "SET" mode is turned off and the setting mode is changed to
the monitor mode.
SETTING ON/OFF TIME
<Example> "A" pattern, Friday, Setting 2, PM 1:00 (ON) /
PM 5:00 (OFF)
In case that the remote control switch (PC-P1H(E)) is used
together, both setting of ON TIME and OFF TIME are required
for setting a, 2 and 3. (The setting of ON TIME (or OFF TIME)
only is not available).
In case that the central station (PSC-5S) is used together, the
setting of ON TIME (or OFF TIME) only is available.
1. Depress the "SET/MONITOR" switch.
The control timer is changed to the setting mode, the "SET"
indication is turned on and the " " mark is flickered.
The right figure shows the case of changing to the setting
mode.
2. Select "A" or "B" pattern by depressing the "A/B" switch.
Refer to "B". Changing weekly Schedule pattern A or B
for changing the pattern
OPERATION PROCEDURE
/
9
6
ATTENTION: