5.
Figure 124. Saving Emulex LightPulse BIOS Settings
Set the Boot Device
Now set the boot device. Note that the settings for the 8-Gbps (12002) and the 16-Gbps (16002) devices are
identical.
1.
© 2017 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Press the Esc key again. Press Y to reboot the system and save your changes (Figure 124).
Select a connected boot device from the Fibre Channel port and then press the Enter key (Figure 125).
Page 110 of 146