Mounting The Set - Philips PT9000 User Manual

Mounting the set

Warning
•
Install the set as far as possible from sources of interference, such as a refrigerator,
microwave oven, fluorescent lamp, and so on.
•
Install the set on a board that is at least 15mm thick.
1
Find a spot near a wall outlet and an antenna jack.
2
Verify the correct mounting direction.
3
Attach the mounting arm to the mounting surface.
• Make sure that the mounting plate is parallel to the mounting
surface.
4
Fix the supplied screws vertically and firmly into the board.
5
Detach all the connections from the set.
EN 35