Change Settings; Change General Settings; Change Video Settings - Philips HTS2200 User Manual

6

Change settings

This section helps you to change the settings of
your home theater.
Caution
•
Most of the settings are already confi gured
with the best value for the home theater.
Unless you have a specifi c reason to change a
setting, it is best to leave it at the default value.
1
Press - .
The following menu appears.
»
Symbol
2
Select a setup menu, then press OK .
See the following sections for information
about how to change the settings of your
home theater.
3
Press - to return to the previous
menu, or press
Note
•
You cannot change a setting that is grayed out.
1_HTS2200_93-EN-US.indd Sec1:11 1_HTS2200_93-EN-US.indd Sec1:11
Description
[General Setup]
[Video Setup]
[Preference Setup]
- to exit.

Change general settings

1
Press - .
2
Select [General Setup] , then press OK .
3
Select and adjust the following settings:
•
[OSD Language] : Selects the on-
screen display menu language.
• [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
• [DivX® VOD Code] : Displays the
DivX VOD registration code for the
home theater.
4
Press OK to confi rm your choice.
Note
•
Before you purchase DivX videos and play
them on the home theater, register the home
theater on www.divx.com using the DivX
VOD code.

Change video settings

1
Press - .
2
Select [Video Setup] , then press OK .
3
Select and adjust the following settings:
• [TV System] : Selects a TV system that
is compatible with the TV.
• [TV Display] : Selects a picture display
format to fi t the TV screen.
•
[Screen Fit] : Selects a full screen
format that best fi ts to the TV screen.
• [Picture Settings] : Selects a
predefi ned color setting.
•
[Progressive] : Enables or disables
progressive scan mode.
4
Press OK to confi rm your choice.
Note
•
The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
•
Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
EN 11
7/19/2010 1:42:29 PM 7/19/2010 1:42:29 PM