Quick Operation (English)
Setting up the battery pack
Charging status
During charge
Charge complete
CHARGE
indicator
If the CHARGE indicator does not light,
check that the connections (
and
) are firmly made.
After charging is complete, attach the battery pack to the camcorder.
Removing the battery pack
1
CHARGE indicator
Lit
Unlit
,
,
Note
Charging will not occur if the DC
power cord is connected.
Always turn the power off before disconnecting
the power supply.
While pressing and holding the BATT switch,
slide the battery pack upward, then remove it.
• Be careful not to drop the battery pack
while detaching it.
Terminal at bottom