Product Overview - D-Link DNR-322L Quick Install Manual

1
2
3
1 Cover Release
2 Security Lock
3 Power Port
4 Ethernet Port
5 USB Port
6 Power Button
7 Auto Scan Button
HDD LED
8
(Left and Right)
Reset Button
(on bottom)

Product Overview

Back
5
4
Press to open the case.
This lock can be used to tie the device down to prevent theft. Cables are not included.
Connect the supplied power adapter to this port.
Use the Gigabit Ethernet Port to connect the device to the local network. The port is
equipped with both a Traffic LED (L) and LAN LINK (R) to indicate connectivity and traffic
respectively to the LAN.
Connect a USB thumb drive or external hard drive (with external power supply) for extra
storage.
Press to turn the device on or press and hold for five seconds to turn off.
Used to scan for and add cameras on the local network. (Note that camera passwords
may need to be entered through the DNR-322L web interface in order to complete the
process).
A solid green light indicates that the hard drive is installed properly. This light will blink
during the read/write process. If the light is red, this indicates the hard drive is installed
but failed.
Press and hold for 10 seconds to reset the device back to the factory default settings.
6
3
Front
7 8