Page 1: Table Of Contents
Be sure to read this manual before servicing. To assure safety from ﬁ re, electric shock, injury, harmful radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be sure to read cautionary items described in the manual to maintain safety before servicing.
Page 2: Features
CP-X807(EDX50WL) 1. Features • High Brightness • Cable-Free Presentations • Multiple Screens • Stand Alone Presentations • Remote Control Via Your Web Browser • Low Noise • Rich Connectivity 2. Specifications Drive system TFT active matrix Liquid crystal Panel size 2.0cm(0.79 type) panel Number of pixels...
Page 3: Names Of Each Part
CP-X807(EDX50WL) 3. Names of each part ● Projector HOT! (1) Speakers (2) Focus ring (20) (3) Zoom ring (11) (4) Lamp cover The lamp unit is inside. (15) (5) Lens shift cover HOT! (6) Horizontal lens shift dial (12) (7) Vertical lens shift dial (14) (8) Front cover (9) (11)
Page 4: Rear Panel
CP-X807(EDX50WL) Control panel (1) STANDBY/ON button (2) MENU button It consists of four cursor buttons. (3) INPUT button (4) POWER indicator (5) TEMP indicator (6) LAMP indicator Rear panel (1) Shutdown switch (2) Security slot (3) Security bar (4) AC inlet (21) (22) (5) Power switch...
Page 5 CP-X807(EDX50WL) Remote control LASER (1) Laser pointer INDICATOR STANDBY/ON VIDEO It is a beam outlet. (2) LASER INDICATOR (3) LASER button (4) STANDBY/ON button (17) BLANK LASER (5) VOLUME button (6) MUTE button (26) (7) VIDEO button (11) (27) (8) RGB button (21) (9) SEARCH button ASPECT...
Page 6: Adjustment
CP-X807(EDX50WL) 4. Adjustment 4-1 Before adjusting 4-1-1 Selection of adjustment When any parts in the table 4-1 are changed, choose the proper adjusting items with the chart. Table 4-1: Relation between the replaced part and adjustment Adjustment Replaced White Color Flicker Ghost DC OFF...
Page 7 CP-X807(EDX50WL) 4-2 Flicker adjustment (V.COM adjustment) Test pattern for the adjustment Adjustment procedure 1. Use DAC-P - V.COM - R: in the FACTORY MENU to adjust so that the flicker at the center of the screen is less than the flicker at the periphery. (When the flicker is about the same across the whole screen, adjust so that the flicker at the center 128/255...
Page 8 CP-X807(EDX50WL) 4-5 E-POS adjustment (vertical bars adjustment 2) Test pattern for the adjustment Adjustment procedure 1. Make this adjustment after completing the ad- justment in the section 4-4. 2. Use DAC -P - E-POS - R in the FACTORY MENU and use it so that vertical bars are minimized.
Page 9 CP-X807(EDX50WL) 4-7 Color uniformity adjustments Preparations 1. Perform these adjustments after the adjustments 5. Adjustment point No.1 should not be adjusted, described in the section 4-6. because it controls the brightness of the entire 2. Make a color uniformity adjustments for the screen.
Page 10 CP-X807(EDX50WL) Adjustment procedure 1 (When a color differential meter is used) Note: Since excessive correction may lead to a 1. First adjust the [MID-1] tone [G:]. correction data overview during internal 2. Select adjustment point [No.2][G:]. calculations, use the following values for When the background is not [G] monochrome, reference.
Page 11 CP-X807(EDX50WL) Adjustment procedure 2 (visual inspection) 1. First adjust [MIN] tone [G:]. Adjustment technique: 2. Select [No.2] [G:]. First, adjust [B:] of the point whose color is to If the background is [G] monochrome, press the be adjusted so that it approximates that of [ENTER] key on the remote control to switch to [No.1].
Page 12: Adjusting The Zoom And Focus
CP-X807(EDX50WL) 4-8 Adjusting the zoom and focus Focus ring Zoom ring 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture. 4-9 Adjusting the lens shift 1. Use the vertical lens shift knob to shift the picture upward or downward.
Page 13: Troubleshooting
CP-X807(EDX50WL) 5. Troubleshooting Check points...
Page 14 CP-X807(EDX50WL) Power can not be turned on *: Be sure to unplug the power cord before measuring resistance. voltage Measure supplied at pins resistance* between 0Ω (9),(12) and (14) of E800 on pins (9) and (14), and PWB assembly MAIN the PWB assembly MAIN in between pins (12) and standby mode?
Page 15 CP-X807(EDX50WL) Lamp does not light *: Be sure to unplug the power cord before measuring resistance. What is the state of Light LAMP indicator DK03 during operation? Is the LAMP installation install the Lamp correct? Not light Is the voltage at the (4) of E807 on the Not light PWB assembly...
Page 16 CP-X807(EDX50WL) Picture is not displayed when the RGB signal is input Confirm the splash screen the LCD Panels CPC36 connector and the user menu displayed connection to the MAIN correctly? board. PWB assembly MAIN LCD/Lens prism assembly Is the picture from RGB out port displayed correctly PWB assembly MAIN on another monitor...
Page 17 CP-X807(EDX50WL) No sound Check at operating mode (Make sure the state of MUTE , Volume and AUDIO-SPEAKER) Disconnect the speaker from the infinity PWB assembly Main, and Speaker measure its resistance. about 8 PWB assembly Main PWB assembly INPUT Can not control to RS-232C The check after parts change 1.
Page 18 CP-X807(EDX50WL) Image of the WIRELESS NETWORK UNIT is not displayed on the screen. Is the MIU port selected ? Change the port to MIU Wired ? Does the WIRELESS SD Insert the WIRELESS SD card mount on projector card into the SD card slot correctly? Is cable Connect cable...
Page 19 CP-X807(EDX50WL) The WIRELESS NETWORK UNIT can not be communicated to PC. Did you check above P.14 and P.18 ? Check above P.14 and P.18 Once AC power off, and wait When you check until LED changes blinking to connection, LED on lighting after power on.
Page 20 CP-X807(EDX50WL) Can you connect via PWB assembly WIRELESS wired LAN ? Change PC’s IP address setting to “192.168.1.N” (N:1 to 9 or 11 to 254) And check wired LAN connection when wireless LAN is disabled. Change the WIRELESS NETWORK UNIT and your PC’s wireless channel Are there any other setting differ to other PC or something, PC or something using...
Page 21 CP-X807(EDX50WL) Time in not correctly displayed. DATE AND TIME is displayed as 2000/1/1 0:00 in INFORMATION on NETWORK menu. Is TIME Set the time in DIFFERENCE on Set the time. Was the time set before? DATE AND TIME on INFORMATION correct ? NETWORK menu.
Page 22 CP-X807(EDX50WL) Select “INFORMATION” Fig.1 Confirm Configuration Reset Key Fig.2 Reset Wireless Network Unit settings...
Page 23 CP-X807(EDX50WL) Fig.3 Wireless Network Unit Configuration Fig.4 Execute ipconfig...
Page 24: Service Points
CP-X807(EDX50WL) 6. Service points 6-1 Lead free solder [CAUTION] This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions before attempting any soldering work. CAUTION Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder can splatter at high temperatures (600˚C).
Page 25 Therefore, regarding these parts, you can either replace part, LCD/Lens prism assembly, or send the whole unit LCD/Lens prism assembly back to HITACHI, where we will replace the malfunctioning part, recondition the device and send it back to you.
Page 26 CP-X807(EDX50WL) (4) Unscrew PWB assembly MAIN to make it free and disconnect the LCD panel flexible cables. Flexible cables of LCD panel Remove these 6 screws Remove these screws (5) Press and hold the switch S941 using an insulator during maintenance. (6) Keep the unscrewed wires away from all of electric parts.
Page 27 CP-X807(EDX50WL) 3. Maintenance point Swab Each color part has same construction. By using swab and air duster, you can easily remove dust from panel and opti- cal filter. Panel Holder Optical filter 4. Cleaning the panels and optical filters (1) Turn on the set and lit on the lamp. (2) By using swab and air duster, remove the dust.
Page 28 5. Put a new battery in. “+” marking Replace battery with HITACHI MAXELL, Part No.CR2032 only. Use of another battery may present a risk of ﬁre or explosion. Insert a new battery in the battery holder according to its minus terminal indicated in the battery holder, so that the side marked by + is facing.
Page 29: About The Laser Pointer
CP-X807(EDX50WL) 6-4-2 Potting batteries into the remote control • Use the batteries included in this product or two new batteries of the specified type: HITACHI MAXELL, part number LR6 or R6P. 1. Remove the battery cover. Slide back and remove the battery cover in the direction of the arrow.
Page 30: Air Filter
CP-X807(EDX50WL) 6-5 Air filter WARNING • Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufﬁ ciently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector.
Page 31 CP-X807(EDX50WL) 6-6 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ● The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different life- time, and some may burst or burn out soon after you start using them.
Page 32 CP-X807(EDX50WL) Replacing the Lamp A lamp has a ﬁ nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after being started using.
Page 33 CP-X807(EDX50WL) 6-7 Lens WARNING • Before replacing the projector lens, be sure to read this manual, the “User's Manual-Safety Guide” and the “Optional Lens User's Manual” of the LCD projector for use with this lens. • Do not place the lens in a location subject to direct sunlight or other strong lighting or near heat-radiating equipment.
Page 34: Other Care
CP-X807(EDX50WL) 6-8 Other care WARNING Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool sufﬁ ciently. The care in a high temperature state of the projector could cause a burn and/ or malfunction to the projector.
Page 35 CP-X807(EDX50WL) 6-9 Notice of AUTO adjustment Use of AUTO adjustment with the image through RGB input optimizes V_POSI, H_POSI, H_SIZE and H_PHASE automatically. In case that projected image has dark tone around its peripheral, AUTO operation sometimes makes artifacts in the image, shifts capture area and so on. Those failures are caused by period of image data is not exactly distinguished to period of blanking on signal processing.
Page 36 CP-X807(EDX50WL) 6-10 How to inactivate the security functions This projector is equipped with security functions. (1)MyScreen PASSWORD The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. (2)PIN LOCK PIN LOCK is a function which prevents the projector from being used unless a registered Code is input.
Page 37 PIN BOX (ID Inquiring Code) 2. Send HITACHI sales company the Inquiring code (10 digits) to inquire the correct PIN code. 3. With the PIN BOX menu displayed, input the correct PIN code. Enter the correct PIN CODE that HITACHI sales company informed.
Page 38: Related Messages
CP-X807(EDX50WL) 6-12 Related Messages When the unit’s power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.
Page 39: Startup Type
“1 Level” shows one kind of lamp-message according to the LAMP TIME count. “None” shows no lamp-messages. It is the factory default setting. STARTUP TYPE Select the startup screen type. 1 : shows Hitachi Logo 2 : No Hitachi Logo BNC TERMINATION Select the RGB2 (BNC) Terminator.
Page 40 CP-X807(EDX50WL) 6-15 Reset of the Network Web password / User ID, Network Control password ATTENTION : Performing this operation initializes the network settings. If the projector has the customized settings in the network, make a note of the network settings to restore them before this operation.
Page 41: Wiring Diagram
CP-X807(EDX50WL) 7. Wiring diagram...
Page 42 CP-X807(EDX50WL)
Page 43 CP-X807(EDX50WL)
Page 44 CP-X807(EDX50WL)
Page 45 CP-X807(EDX50WL)
Page 46 CP-X807(EDX50WL)
Page 47 CP-X807(EDX50WL)
Page 48 CP-X807(EDX50WL)
Page 49 CP-X807(EDX50WL)
Page 50 CP-X807(EDX50WL)
Page 51 CP-X807(EDX50WL)
Page 52 CP-X807(EDX50WL)
Page 53: Disassembly Diagram
CP-X807(EDX50WL) 8. Disassembly diagram M : Meter Screw T : Tapping Screw [ Remove UPPER CASE ] ( See Notice 1 ) T3X12 T3X12 T3X12 [ UPPER CASE assembly ] [ Remove Network unit ] M3X6 Exhaust Duct (with FAN) (See Notice 5) PWB assembly WIRELESS PWB assembly...
Page 54 CP-X807(EDX50WL) M : Meter Screw T : Tapping Screw [ PANEL DUCT ] [ Remove Duct and Power unit ] [ FILTER UNIT ] - assembly - - assembly - T3X12 - Disassembly - - Disassembly - [ Remove Panel Duct assembly ] ( See Notice 3 ) T3X12 [ LCD/LENS/PRISM/...
Page 55 CP-X807(EDX50WL) Notice 1. The step of the disassembly / The step of the assembly. Disassemble the projector in order of 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 and 11 as shown in the diagram. Assemble the projector in order of 11, 10, 9, 8, 7, 6, 5, 4, 3, 2 and 1 as shown in the diagram.
Page 56 CP-X807(EDX50WL) Notice 1. Detach and attach the upper case. Follow the procedure below to detach and attach the upper case. When disassembling a. Remove the Lamp door. CAUTION The lamp door must be removed before the upper case when disassembling the machine. If the upper case is detached with the lamp door installed, the MAIN board might be damaged.
Page 57 CP-X807(EDX50WL) (2) Remove 2 screws on the front. (3) Remove the front cover. front cover 2 screws c. Remove 9 screws on the bottom and 2 screws on the rear to detach the upper case. 2 screws 9 screws...
Page 58 CP-X807(EDX50WL) When assembling a. Tighten 9 screws on the bottom and 2 screws on the rear after attaching the upper case with the lamp door separated. In order not to make a gap between the upper and the bottom cases, tighten these screws while pressing down the upper case in the direction of the arrow.
Page 59 CP-X807(EDX50WL) c. Attach the Lamp door. Lamp door CAUTION Tighten this screw using a manual screwdriver. 2. Replacing the power units. Remove the screw to take off the duct. Remove the 3 screws to take off the power unit. NOTE : One of screws is behind the duct.
Page 60 CP-X807(EDX50WL) 3. Detaching and attaching the Panel Fan Duct assembly When disassembling Remove 6 screws and unhook the panel fan duct assembly as shown in the diagram. Panel fan duct assembly When assembling Tighten 6 screws and hook the panel fan duct assembly.
Page 61 CP-X807(EDX50WL) 4. Attaching the dichroic optics unit ④ Put the dichroic optics unit on the bottom case, and tighten screws in order of 1, 2, 3 and 4 as shown in the diagram. ② ③ ① Never remove the 7 screws (4 screws on the obverse, 3 screws on the reverse) from DICHRO OPT unit.
Page 62 CP-X807(EDX50WL) 7. Assembling the power unit CAUTION Make sure that power unit board was ﬁ xed by 4 hooks of PWB HOLDER. Make sure that it is hard to remove. Cross Section 8. Assembling the FOOT MTL Remove the remote board first when assembling the FOOT MTL. This is necessary when replacing the FAN and so on.
Page 63 CP-X807(EDX50WL) 9. Attaching the LAMP HOUSE Never forget the insulation sheet when you attach the LAMP HOUSE. insulation sheet 10. Replacing the BALLAST Bundle the igniter leads with trigger box when you attach the BALLAST. igniter leads trigger box...
Page 64: Replacement Parts List
CP-X807(EDX50WL) 9. Replacement Parts list PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components, read carefully, the PRODUCT SAFETY NOTICE of this Service Manual. Don't degrade the safety of the projector through improper servicing.
Page 65: Rs-232C Communication
CP-X807(EDX50WL) 10. RS-232C communication CONTROL port RS-232C cable (Cross) RS-232C port of the projector of the computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS CTS (8)
Page 66 CP-X807(EDX50WL) Requesting projector status (Get command) (1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+ ‘00H’ +‘00H’) from the computer to the projector. (2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer. Changing the projector settings (Set command) (1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.
Page 67 CP-X807(EDX50WL) Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Conﬁgure the following items form a web browser when command control is used. Port Settings Click the [Enable] check box to open [Network Port open Control Port1 (Port: 23)] to use TCP #23.
Page 68: Command Format
CP-X807(EDX50WL) Command Format [TCP #23] 1. Protocol Consist of header (7 bytes) + command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high CRC_low: Lower byte of CRC ﬂag for command data CRC_high: Upper byte of CRC ﬂag for command data 3.
Page 69 CP-X807(EDX50WL) Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (‘05H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code ‘06H’...
Page 70 CP-X807(EDX50WL) 7. Reply Data The connection ID (the data is same as the connection ID data on the sending data format) is attached to the Network control commands reply data. ACK reply: ‘06H’ + ‘xxH’ NAK reply: ‘15H’ + ‘xxH’ Error reply: ‘1CH’...
Page 71: Command Data Chart
CP-X807(EDX50WL) Command data chart Command Data Names Operation Type Header Action Type Setting Code Power TURN OFF BE EF 06 00 2A D3 01 00 00 60 00 00 TURN ON BE EF 06 00 BA D2 01 00 00 60 01 00 BE EF 06 00...
Page 72 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code GAMMA #1 DEFAULT BE EF 06 00 07 E9 01 00 A1 30 20 00 #1 CUSTOM BE EF 06 00 07 FD 01 00 A1 30 10 00 #2 DEFAULT BE EF 06 00...
Page 73 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP HIGH BE EF 06 00 0B F5 01 00 B0 30 03 00 BE EF 06 00 9B F4 01 00 B0 30 02 00 BE EF 06 00 6B F4 01 00...
Page 74 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code MY MEMORY Load BE EF 06 00 0E D7 01 00 14 20 00 00 BE EF 06 00 9E D6 01 00 14 20 01 00 BE EF 06 00 6E D6 01 00...
Page 75 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code COLOR SPACE AUTO BE EF 06 00 0E 72 01 00 04 22 00 00 BE EF 06 00 9E 73 01 00 04 22 01 00 SMPTE240 BE EF 06 00 6E 73 01 00...
Page 76 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code FRAME LOCK TURN OFF BE EF 06 00 3B 2C 01 00 50 30 00 00 RGB1 TURN ON BE EF 06 00 AB C3 01 00 50 30 01 00 BE EF 06 00...
Page 77 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code VOLUME-Component BE EF 06 00 01 CC 02 00 65 20 00 00 Increment BE EF 06 00 67 CC 04 00 65 20 00 00 Decrement BE EF 06 00 B6 CD 05 00...
Page 78 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code SRS WOW – RGB1 TURN OFF BE EF 06 00 FE FF 01 00 90 20 00 00 BE EF 06 00 9E FE 01 00 90 20 02 00 HIGH BE EF 06 00...
Page 79 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code AUDIO - RGB1 TURN OFF BE EF 06 00 FE DD 01 00 30 20 00 00 Audio1 BE EF 06 00 6E DC 01 00 30 20 01 00 Audio2 BE EF 06 00...
Page 80 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code REMOTE RECEIV. BE EF 06 00 FF 32 01 00 00 26 00 00 Front BE EF 06 00 6F 33 01 00 00 26 01 00 BE EF 06 00 CC 32 02 00...
Page 81 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code BLANK My Screen BE EF 06 00 FB CA 01 00 00 30 20 00 ORIGINAL BE EF 06 00 FB E2 01 00 00 30 40 00 BLUE BE EF 06 00 CB D3...
Page 82 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code MY BUTTON-1 RGB1 BE EF 06 00 3A 33 01 00 00 36 00 00 RGB2 BE EF 06 00 FA 31 01 00 00 36 04 00 HDMI BE EF 06 00 CA 33...
Page 83 CP-X807(EDX50WL) Command Data Names Operation Type Header Action Type Setting Code MAGNIFY BE EF 06 00 7C D2 02 00 07 30 00 00 Increment BE EF 06 00 1A D2 04 00 07 30 00 00 Decrement BE EF 06 00 CB D3 05 00...
Page 84: Block Diagram
CP-X807(EDX50WL) 11. Block diagram...
Page 85: Connector Connection Diagram
CP-X807(EDX50WL) 12. Connector connection diagram Connector connection diagram...
Page 86: Basic Circuit Diagram
CP-X807(EDX50WL) 13. Basic circuit diagram Parts with hatching are not mounted. CONFIDENTIAL APU5 APUM APUP ET21 UBB-4R-D14C ET03 PH-03V-D RS232C ET01 3175-09M ET02 APRD APTD APT6 PH-05V-D USB D- USB D+ APT4 APSG GND1 PWB assembly CONTROL APL1 APL3 LL36 EL06 1608 SH-02H...
Page 87 CP-X807(EDX50WL) CONFIDENTIAL FRONT-56 FRONT-38 UP-56 IR04 IR03 IR02 IR01 KSM-2003LM2EL KSM-2003LM2EL KSM-2003LM2EL KSM-2003LM2EL Vout Vout Vout Vout CR10 CR07 CR04 100p-C 100p-C 100p-C RR08 RR02 2125 2125 CR01 100p-C ER01 ZH-06H PWB assembly REMOTE E941 S941 ZH-02H AP91 AV34423 TO-SW AP92 COVER PWB assembly SW...
Page 88 CP-X807 (EDX50WL) CONFIDENTIAL POWER UNIT (BALLAST) 1...
Page 89 CP-X807 (EDX50WL) CONFIDENTIAL POWER UNIT (BALLAST) 2...
Page 90 CP-X807 (EDX50WL) CONFIDENTIAL POWER UNIT (BALLAST) 3...
Page 91 CP-X807 (EDX50WL) CONFIDENTIAL POWER UNIT (CIRCUIT) 1...
Page 92 CP-X807 (EDX50WL) CONFIDENTIAL POWER UNIT (CIRCUIT) 2...
Page 93 CP-X807 (EDX50WL) CONFIDENTIAL EC03 YKC21-4673V APC20 CVBS LC01 NFL21SP407X1C3 2125 LC02 APC21 R1(SW) APC22 1608 APC23 APC24 LC03 NFL21SP407X1C3 2125 LC04 APC51 APC52 LC09 1608 EC01 L1(WHITE) NFL21SP407X1C3 ZH-09V APC1 2125 LC10 CVBS NFL21SP407X1C3 2125 APC2 APC25 LC05 APC3 NFL21SP407X1C3 2125 LC06 APC53...
Page 94 CP-X807 (EDX50WL) CONFIDENTIAL TEMP DK02 SML-210VT RK23 QK23 1005 DTC114EUA EK01 ZH-12H RK01 APY01 KEYO-0 LAMP DK03 RK02 APY02 SML-210VT KEYO-1 RK24 APY03 QK24 DTC114EUA 1005 RK04 APY04 KEYI-0 RK05 APY05 KEYI-1 RK06 APY06 KEYI-2 RK07 APY07 QK22 RK21 LED GREEN QK21 DTC114EUA DTC114EUA...
Page 95 CP-X807 (EDX50WL) CONFIDENTIAL C2H1 C2H2 18p-C 15p-C 1005 1005 R2R8 R2N1 1.0k RESETN R215 1005 1005 R2N2 1.0k 1.0k 1.0M Q201 1005 I201 1005 DTC114EE MISC PW288B-10L R216 EMU-RESET L201 R2F0 I201 RESETB 1608 R240 PW288B-10L 1005 1005 INPUT PORT 0 R2K6 CHXTI HDMI_CLK...
Page 96 CP-X807 (EDX50WL) CONFIDENTIAL L251 +3.3V 1608 N251 R263 1.0k-1% I251 S29AL016D70TFI010 1005 I201 MAIN MEMORY PORT PW288B-10L GND1 BYTE# MVREF MREFIN0 C253 C262 R254 Vss-46 MREFIN1 I252 I253 R2E3 0.1/10 0.1/10 EDD2516AKTA-6B EDD2516AKTA-6B R266 2010 1005 MCK0 1005 1005 DQ15/A-1 VDD-1 VSS-66 VDD-1...
Page 97 CP-X807 (EDX50WL) CONFIDENTIAL 38_REAR 56_REAR I001 *I002 KSM-2003LM2EL KSM-2003LM2EL Vout GND VCC Vout GND VCC *C004 R001 100p-C +3.3V C001 100p-C I313 R308 TC7SZ32FU S310 IN_B +6.6V 1005 6.6V I301 SKHHLMA010 S-80950CNMC-G9LT2G IN_A REAR 3.3V R311 3.3V R303 3.3V RESETN (OR) Q302 R309...
Page 98 CP-X807 (EDX50WL) CONFIDENTIAL I809 MM1662FHBE C831 R822 Cont 470p 1005 1005 NC-6 I808 I801 BD00KA5WFP-E2 NC-7 NC-2 C829 SI-3010KM Sub-2.5V-TG Vout 1.0/10 1.0V-TG 15.5V-Panel L816 C823 GND1 +4.0V 0.033/16 1.8V-CPU C6-K3LA +17V +1.8VCPU FANGND 1005 I807 FAN15V TPS40222DR JUMPER R 3.3V-CPU 3.3V-Panel PVIN...
Page 99 CP-X807 (EDX50WL) CONFIDENTIAL L401 I401 2518 L3E07111KOA +3.3VP +1.0V VDD10-D13 L402 VDD10-D14 C421 2.2/6.3 VDD10-D15 HRESETO CHHRST 2518 VDD10-E13 VRESETO CHVRST VDD10-E14 HPLL CHHPLL C422 0.01/16 VDD10-F17 CLP1 CHCP1 VDD10-F4 CLP2 CHCP2 R442 1005 VDD10-F5 SHENB CHSHE 1005 C423 VDD10-G16 0.1/10 VDD10-G17 DIRY...
Page 100 CP-X807 (EDX50WL) CONFIDENTIAL EDX R Panel Part +3.3VP +15.5V JUMPER R SHCLKR SHCLKR ENBXR1 ENBXR1 DXOUTR DXOUTR CLXOUTR JUMPER R P501 CLXOUTR 54104-36HUp DYOUT DYOUT Q501 CLYOUT CLYOUT DTC114EE ENBY1 R552 APR36 ENBY1 ENBY2 RLCCOM ENBY2 LCCOM 1005 APR35 XFRR XFRR VDDY FRPR...
Page 101 CP-X807 (EDX50WL) CONFIDENTIAL EDX G Panel Part +3.3VP +15.5V JUMPER R SHCLKG SHCLKG ENBXG1 ENBXG1 DXOUTG DXOUTG JUMPER R CLXOUTG P601 CLXOUTG Q601 54104-36HUp DYOUT DYOUT DTC114EE CLYOUT R652 CLYOUT ENBY1 APG36 ENBY1 ENBY2 GLCCOM 1005 ENBY2 LCCOM APG35 XFRG XFRG VDDY FRPG...
Page 102 CP-X807 (EDX50WL) CONFIDENTIAL EDX B Panel Part +3.3VP +3.3VP +15.5V JUMPER R SHCLKB SHCLKB ENBXB1 ENBXB1 DXOUTB P701 DXOUTB JUMPER R 54104-36HUp CLXOUTB CLXOUTB DYOUT DYOUT CLYOUT Q701 CLYOUT DTC114EE ENBY1 R752 APB36 ENBY1 ENBY2 BLCCOM ENBY2 LCCOM 1005 APB35 XFRB XFRB VDDY...
Page 103 CP-X807 (EDX50WL) CONFIDENTIAL R186 C197 1.0k 1.0/10 1005 RESETN R103 2125 1005 I2CCLK I2CDAT R102 CS_POL 1005 Csync_Negative I102 SN74LVC1G86DCK Csync_Positive R172 CS_POL 4.7k R195 1.2k LPF_RGB 1005 R173 4.7k LPF OFF 1005 1005 LPF ON R140 GND1 LPF_RGB R187 1005 R141 1005...
Page 104 CP-X807 (EDX50WL) CONFIDENTIAL HV_Sel Wireless(In1) VideoDecorder(In0) Buffer D+3.3V IV07 SN74LVC1G126DCK TV06 D+1.5V D+3.3V LV07 RV51 CV66 LV06 CV69 CV67 CV08 CV68 0.1/10 2518 CV07 0.1/10 0.1/10 0.1/10 1005 2518 0.1/10 10/10 1005 1005 1005 1005 1005 2125 LV01 CV81 0.1/10 2518 1005 TV01...
Page 105 CP-X807 (EDX50WL) CONFIDENTIAL DDC for RGB1(D-Sub) RS72 1005 RS73 1005 RS71 LS18 1005 2518 GND1 APIGD1 ES01 3114-15FA APICK1 LS01 SC200JT GND1 APIV1 2125 Vsync APIB1 LS04 SC200JT PLUG B1(D-Sub) RS36 2125 APIH1 CS04 0.6V Hsync APIG1 10/6.3 1005 LS05 2125 SC200JT GND-B...
Page 106 CP-X807 (EDX50WL) CONFIDENTIAL IG12 MM1661JHBE CG95 IG11 MM1663DHBE Cont RG07 +6.6V 470p CG92 1005 Cont NC-6 470p I2CCLK 1005 NC-6 NC-7 NC-2 I2CDAT HPD_RST NC-7 NC-2 Vout JUMPER LG01 3.3V RG06 Vout LG05 2125 +4.0V 2125 RG03 RG02 IN0VS RG01 1005 IN0HS 1005...
Page 107 CP-X807 (EDX50WL) CONFIDENTIAL IRIS Controller RS232C Controller RW41 3.3V IRIS_CW 3.3V IRIS_OE 3.3V RESETB CW57 IRIS_RST 3.3V 3.3V 5.0V IRIS_LED 0.1/10 2010 1005 3.3V IRIS_CLK IW53 RW46 RW97 uPD168110 IW02 1005 ADM202EARNZ 3.3V IRIS_SAV MODE RESETB 1005 3.3V LGND EW04 T1OUT CW58 CW60...
Page 108 CP-X807 (EDX50WL) CONFIDENTIAL size : JUMPER R 1608 : 0790001R 2125 : 0195250R LA01-04 3216 : 0195248R 3.3V Sheet 1 Sheet 1 SP_OFF 14.5V Sheet 4 +14.5V CA99 47/25 8.5V MVK/SKV Audio in Monitor TP007 TP001 Audio Power GND 4.4V P_GND RAK0 0.0V...
Page 109 CP-X807 (EDX50WL) CONFIDENTIAL +3.3V 1005 0.1/10 LE03 SC200JT CE16 2125 IE03 RE71 3.3V LE01 REF6 SN74LVC1G97DCK OEM_ID0 1005 3.3V SC200JT 1005 2125 3.3V OEM_ID1 LE04 RE72 SC200JT 2125 1005 REF7 1005 LE06 REH1 SC200JT 2125 LED_OUT 1005 EXTINT REH2 XE03 *IE04 6.00MH RRX6000-0702L...
Page 110 CP-X807 (EDX50WL) CONFIDENTIAL DCLKFB DCLK DCKE xDWE xDCAS xDRAS VDVSYNC VDHSYNC DDQM3 DDQM3 VDCLKOUT DDQM2 DDQM2 VDPCLKIN DDQM1 DDQ31 DDQM1 VDENABLE DDQ31 DDQM0 DDQ30 DDQM0 DDQ30 EMC1 DDQ29 DDQ29 DBA1 SH-04H DDQ28 DBA1 DDQ28 DBA0 DDQ27 DBA0 DDQ27 DDQ26 DDQ26 DDQ25 xDCS0 DDQ25...
Page 111 CP-X807 (EDX50WL) CONFIDENTIAL 3.3VM A23F A17F D31F A23F D31F A22F S29AL032D70TFI030 D30F A22F D30F A21F A16F A17F D29F A21F D29F A20F D28F A20F D28F A19F A15F D27F A19F BYTE# D27F A18F D26F A18F D26F A17F A14F D25F A17F Vss-46 D25F A16F D24F A16F...
Page 112 CP-X807 (EDX50WL) CONFIDENTIAL DDQ31 DDQ31 DDQ30 DDQ30 DDQ29 DDQ29 3.3VM DDQ28 RM75 DDQ28 DDQ27 DDQ27 1005 DDAA12 DDQ26 DDA12 DDQ26 DDQ25 DDAA11 DDA11 Vcc-1 Vss-54 DDQ25 RM76 DDAA10 RM80 RM79 DDQ24 DDA10 DDQ24 DDQ23 DDAA9 DDQ16 DDQ31 DDA9 DQ15 DDQ23 GND1 2010 DDAA8...
Page 113 CP-X807 (EDX50WL) CONFIDENTIAL RM131 3.3RTC RM132 3.3VM RM147 xINTB 1005 R2051S02-E2 CM188 NC-1 RM304 9.0p-C 1005 +3_BTRY 1005 1SS355 CLKOUT NC-14 RM137 SCL0 OSCIN RM138 1005 SDA0 OSCOUT 1005 NC-6 NC-11 EBM2 RM152 CM189 NA87611 3.3VM VDCC INTR 1005 9.0p-C CM60 1005 0.1/10...
Page 114 CP-X807 (EDX50WL) CONFIDENTIAL 3.3VM SCL1 SDA1 LRCKI BCKI xIRQ7 xIRQ7 xIRQ6 xIRQ6 xIRQ5 xIRQ5 xIRQ4 xIRQ4 A31F A31F A30F A30F A29F A29F A28F A28F A27F A27F A26F A26F A25F A25F A24F A24F xBSTACK xBSTREQ xBREQ xERR xRAMBOOT VCVSYNC VCHSYNC VCDCLKIN VDVSYNC VDHSYNC VDACSYNC_T...
Page 115 CP-X807 (EDX50WL) CONFIDENTIAL QMR4 SSM6J25FE 3.3VM IM11 LM11 R5520H001B-T1 HPWREN QMR1 SLF6028 MCH3309-TL 3.3VM HOVERCUR RM419 xSDIOPWRON 1.5K 1005 GND1 UBA-4R-D10T-1 RM400 UDM1 RM401 1005 UDP1 GND1 1005 RM192 G1 G2 G3 2125 SDAT3 SDAT3 SDAT2 SDAT2 SDAT1 SDAT1 GND1 SDAT0 SG5S009V1D2 SDAT0...
Page 116 CP-X807 (EDX50WL) CONFIDENTIAL CMU9 RMU4 RMU5 0.001 10K-1% 10K-1% 1005 1005 CMU8 0.01 GND1 IM75 MP2361DK GND1 Fixed 1.4MHz SW Freq. GND1 RM241 LMT5 RM244 3.3VM 2125 CMU3 2125 7E06NG LMU4 0.01 FMS1 CM124 +15V 0.1/10 2125 1005 miniSMDC050F CMU1 CMU2 CMU4 CMU5...
Page 117 CP-X807 (EDX50WL) CONFIDENTIAL 3.3VM CLK20MO D31F D31F D30F D30F D29F D29F D28F D28F D27F D27F D26F D26F D25F D25F D24F D24F D23F D23F D22F D22F D21F D21F D20F D20F D19F D19F D18F D18F D17F D17F D16F D16F D15F CM166 D15F D14F 1005 D14F...
Page 118 CP-X807(EDX50WL) Basic circuit diagram list PWB assembly CONTROL PWB assembly MAIN 7 PWB assembly BATTERY PWB assembly MAIN 8 PWB assembly REMOTE PWB assembly MAIN 9 PWB assembly SW PWB assembly MAIN 10 POWER UNIT BALLAST 1 PWB assembly MAIN 11 POWER UNIT BALLAST 2 PWB assembly MAIN 12 POWER UNIT BALLAST 3...
Page 119 CP-X807(EDX50WL) MEMO...
Page 120 CP-X807 YK No.0598E QR73831 Printed in Japan (JE)

Hitachi CP-X807(EDX50WL) Service Manual

Quick Links

SERVICE MANUAL

Related Manuals for Hitachi CP-X807(EDX50WL)

Summary of Contents for Hitachi CP-X807(EDX50WL)

Table of Contents