Playback; Playing - Sony RMT-D217P Service Manual

Playback

Playing

HDD + RW - RW - RW + R -
R
VR
Video
DVD VCD CD DATA DVD DATA CD
Z
HDD DVD
1 2 3
PROG +/–
4 5 6
7 8 9
INPUT
0 SELECT
SUR
TITLE LIST
MENU
TOP MENU
</M/m/,,
ENTER
TOOLS
PROGRESSIVE
/ >
.
H/X/x
1
Press HDD or DVD.
• If you select DVD, insert a disc (see
"Inserting a Disc" on page 29).
• If you insert a DVD VIDEO, VIDEO CD, or
CD, press H. Playback starts.
2
Press TITLE LIST.
For details about the Title List, see "3. Playing
the Recorded Programme (Title List)" on
page 32.
52
Playback options
To check the position of the buttons below, see the illustration on page 52.
Buttons
Operations
(audio) Selects one of the audio tracks recorded on the disc when pressed repeatedly.
: Selects the language.
DVD
- RW DVD
HDD VR
- RW
HDD
VR
VCD CD
VCD CD
(subtitle) Selects a subtitle language when pressed repeatedly.
DVD
(angle) Selects an angle when pressed repeatedly.
If various angles (multi-angles) for a scene are recorded on the disc, "
DVD
appears in the front panel display.
SUR (surround) Selects one of the TVS effects when pressed repeatedly.
TVS* (TV Virtual Surround) lets you enjoy virtual surround sound effects
- RW - RW
+ RW VR
Video
created from the front left and right speakers. The selected setting is displayed
+ R - DVD
R
in the front panel display for a few seconds.
"TVS OFF": No surround effect
"TVS DYNAMIC": Creates one set of virtual rear speakers.
"TVS WIDE": Creates five sets of virtual rear speakers.
"TVS NIGHT": Creates five sets of virtual rear speakers. Effective at low
volume.
"TVS STANDARD": Creates three sets of virtual rear speakers. Effective
when you use two separate front speakers.
* TVS was developed by Sony to produce home surround sound with just a stereo
TV.
PROGRESSIVE Switches the type of video output signal to interlace or progressive format
(page 16).
+ + - RW
HDD RW RW VR
- RW + R - R
Video
DVD VCD
/ (instant replay/ Replays the scene/briefly fast forwards the scene.
instant advance)
+ RW - RW
HDD VR
- RW + R - R
Video
DVD
. (previous)/
Goes to the beginning of the previous/next title/chapter/scene/track.
> (next)
For the HDD, you cannot go to the beginning of the previous/next title.
54
Example: DVD-RW (VR mode)
TITLE LIST
ORIGINAL 4.3 / 4.7 GB
12
Tennis
AAB
Fri 28.10. 2005 13:00 (0H30M) LSP 0.9 GB
11 Travel
DEF
Wed 26.10. 2005 20:00 (0H30M) SEP 0.3 GB
10
Mystery
AAB
Tue 25.10. 2005 9:00 (1H00M) SLP 0.8 GB
9 World Sports
GHI
Wed 19.10. 2005 20:00 (1H00M) SEP 0.6 GB
3
Select the title, and press ENTER.
The sub-menu appears.
4
Select "Play," and press ENTER.
Playback starts from the selected title.
To use the DVD's Menu
When you play a DVD VIDEO, or a finalized
DVD+RW, DVD-RW (Video mode), DVD+R, or
DVD-R, you can display the disc's menu by
pressing TOP MENU or MENU.
To play VIDEO CDs with PBC functions
PBC (Playback Control) allows you to play
VIDEO CDs interactively using the menu on your
TV screen.
When you start playing a VIDEO CD with PBC
functions, the menu appears.
Select an item using the number buttons and press
ENTER. Then, follow the instructions in the menu
H
(press when "Press SELECT" appears).
The PBC function of Super VIDEO CDs does not
work with this recorder. Super VIDEO CDs are
played in continuous play mode only.
To stop playback
x
Press .
To playback quickly with sound (Scan Audio)
When you press M during playback of a title
recorded in the HDD, you can play quickly with
dialogue or sound ("x1.5" appears).
No sound is output when you press M two or
more times to change search speed.
: Selects the main or sub sound.
: Selects stereo or monaural audio tracks.
To resume playback from the point where you
stopped (Resume Play)
When you press H again after you stop
playback, the recorder resumes playback from the
x
point where you pressed .
To start from the beginning, press TOOLS to
select "Play Beginning," and press ENTER.
Playback starts from the beginning of the title/
track/scene.
The point where you stopped playing is cleared
when:
– you open the disc tray (except for HDD).
– you play another title (except for HDD).
– you switch the Title List menu to Original or
Playlist (HDD/DVD-RW in VR mode only).
– you edit the title after stopping playback.
– you change the settings on the recorder.
– you turn off the recorder (VIDEO CD/CD/
DATA DVD/DATA CD only).
– you make a recording (except for HDD/DVD-
RWs in VR mode).
– you switch between JPEG and MP3.
b
Note
You cannot resume playback during TV Pause.
To play restricted DVDs (Parental Control)
If you play a restricted DVD, the message "Do
you want temporarily change parental control to
*?" appears on your TV screen.
1
Select "OK" and press ENTER.
The display for entering your password
appears.
2
Enter your four-digit password using the
number buttons.
3
Press ENTER to select "OK."
The recorder starts playback.
To register or change the password, see "Parental
Control (DVD VIDEO only)" on page 85.
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent children from
ejecting the disc.
When the recorder is turned on, hold down x until
"LOCKED" appears in the front panel display.
The Z (open/close) button does not work while
the Child Lock is set.
To unlock the disc tray, hold down x until
"UNLOCKED" appears in the front panel display
when the recorder is turned on.
Buttons
Operations
Fast reverses/fast forwards the disc when pressed during playback.
(fast reverse/fast forward) Search speed changes as follows:
When you press and hold the button, fast forward/fast reverse continues at the
selected speed until you release the button.
*1
When you press
can play quickly with sound ("x1.5" appears).
m
*2
Plays in slow motion when pressed for more than one second in pause mode.
(slow, freeze frame) Plays one frame at a time when pressed briefly in pause mode.
"
+ + - RW
HDD RW RW VR
- RW + R - R
Video
*
DVD VCD
* Playback direction only
X (pause)
Pauses playback.
To resume normal playback, press H.
b
Notes
• To enjoy the TVS function, set "Digital Out" to "On"
and "Dolby Digital" to "D-PCM" and "MPEG" to
"PCM" in "Audio" setup.
• The volume may be reduced when surround effects are
set.
• When the playback signal does not contain a signal for
the rear speakers, the surround effects will be difficult
to hear.
In addition, the surround effects may also be difficult to
hear depending on the title being played and the
environment where the recorder is being used.
• When you select one of the surround modes, turn off
the surround settings of the connected TV or amplifier
(receiver).
• Make sure that your listening position is between and
at an equal distance from your speakers, and that the
speakers are located in similar surroundings.
• Angles and subtitles cannot be changed with titles
recorded on this recorder.
• When you use the DIGITAL OUT (COAXIAL) jack to
listen to MPEG audio signals and set "MPEG" to
"MPEG" in "Audio" setup, no sound will come from
your speakers if you select one of the TVS modes.
• 96 kHz PCM audio and DTS audio do not have
surround effects.
• The surround effects do not work while performing
playback quickly with sound.
1-13
One Touch Play
If you use the SMARTLINK connection, you can
easily start playing.
Press H. The recorder and your TV
automatically turn on and the TV's input is
switched to the recorder. Playback starts
automatically.
One Touch Menu
If you use the SMARTLINK connection, you can
easily display the Title List.
Press TITLE LIST. The recorder and your TV
automatically turn on and the TV's input is
switched to the recorder. The Title List appears.
z Hints
• You can also use the H button in step 3 (page 52) to
start playback.
• Even if you select "Factory Setup" in "Options" setup
(page 88), the Child Lock remains set.
fast reverse fast forward
m1 T t 1M
*1
m2 T T t t 2M
m3 *2 T T T t t t 3M *2
M
once during playback of a title recorded in the HDD, you
M
3 and 3 are only available for the HDD and DVDs.
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs, excessive noise will
be heard from the analogue stereo jacks. To avoid
possible damage to the audio system, the consumer
should take proper precautions when the analogue
stereo jacks of the recorder are connected to an
amplification system. To enjoy DTS Digital
Surround™ playback, an external 5.1-channel decoder
system must be connected to the digital jack of the
recorder.
• Set the sound to "Stereo" using the
button when you play DTS sound tracks on a CD
(page 54).
Notes on playing DVDs with a DTS sound track
DTS audio signals are output only through the DIGITAL
OUT (COAXIAL or OPTICAL) jack.
When you play a DVD with DTS sound tracks, set
"DTS" to "On" in "Audio" setup (page 84).
,continued
53
(audio)
,continued
55