IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
●
Press STANDBY -ON 2 or SOURCE (or
2 on the remote control).
➜
The system will switch to the last selected
source.
●
Press DISC, TUNER/DAB, iPod or AUX on
the remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY -ON 2 (or 2 on the
remote control).
To switch the system to Eco-power
standby mode
●
Press and hold STANDBY-ON 2 (or 2 on
the remote control) for more than 2 seconds.
➜
The backlight for clock display is dim.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.
Note:
– In the Eco power standby, no button, except
SOURCE and STANDBY-ON buttons, can be
activated.
Basic Functions
Adjusting volume and sound
1
Press VOL +/- to adjust volume.
➜
Display shows the volume level: VOL and a
number from 01-32.
2
Press DBB on the remote control to switch
bass enhancement on or off.
➜
Display shows:
3
Press MUTE on the remote
control to interrupt sound
reproduction instantly.
➜
Playback will continue
without sound.
●
To activate sound reproduction
you can:
– press MUTE again;
– adjust the volume controls;
– change source.
if the DBB is activated.
11