2-2-7. BX Board (BKM-129X) Removal and Check
∗ In case the interface board of option is attached,
connect it to the Z COMPL in the same way.
BKM-127W
Note : The interface board can be attached to all slots.
But, left side slot should be always used.
2-6
Three slots
BKM-120D
BKM-142HD
3 Z COMPL
(Part No. : A-1394-977-A)
∗ Insert the Z COMPL
into the slot and insert
the BX board (BKM-129X)
into the connector on the
Z COMPL.
1 Loosen two
stopper screws.
2 Remove BX board
(BKM-129X).
BVM-D14H1U/D14H5U/D14H1E/D14H5E/D14H1A/D14H5A