Remove The Top Board Assembly (S). (See Procedure - Yamaha Clavinova CLP-265GP Service Manual

20. Speaker (Tweeter)
(Time required: About 6 minutes each)
20-1 Remove the top board assembly (L) . (See procedure 2.)
20-2

Remove the top board assembly (S). (See procedure 3.)

* The speakers (tweeters) are fixed on the top board
assembly (S).
20-3 Remove the four (4) screws marked [14c]. The speaker
(tweeter) can then be removed. (Fig.18)
* The left and right speakers (tweeters) can be removed in
the same manner.
Rack Assembly
[12]: Bind Head Tapping Screw-1 3.5X20 MFZN2W3 (WE971500)
(Fig.19)
[S09A]
[S06A]
[6A]
Arm Assembly L
[12]
[S07]
[6A,B]: Bind Head Tapping Screw-1 3.5X16 MFZN2W3 (WE970700)
[S06A-C]: Truss Head Tapping Screw-1 3.5X35 MFZN2W3 (WH513700)
[S07]: Truss Head Tapping Screw-1 3.5X16 MFZN2W3 (WF743500)
[S09A,B]: Hex.Head Tapping Screw-1 4.0X16 MFZN2W3 (WF746600)
21. Rack Assembly (L, R)
(Time required: About 7 minutes each)
21-1 Remove the top board assembly (L) . (See procedure 2.)
21-2 Remove the top board assembly (S). (See procedure 3.)
21-3 Remove the key cover assembly. (See procedure 5.)
21-4 Remove the four (4) screws marked [12]. The rack
assembly can then be removed. (Fig.19)
* The rack assemblies L and R can then be removed in the
same manner.
22. Arm Assembly (L,R)
(time required: About 19 minutes each)
22-1 Remove the top board assembly (L) . (See procedure 2.)
22-2 Remove the top board assembly (S). (See procedure 3.)
22-3 Remove the key cover assembly. (See procedure 5.)
22-4 Remove the panel assembly. (See procedure 10.)
22-5 Remove the end block assemblies L and R.
(See procedure 12.)
22-6 Remove the keyboard assembly. (See procedure 15.)
22-7 Remove the support bar assembly. (See procedure 17.)
22-8 Remove the speaker grille assembly and the partition
assembly C. (See procedure 18.)
Back Top Board Assembly
[S07]
[S06C]
(Fig.20)
CLP-265GP
[S09B]
[S06B]
[6B]
Arm Assembly R
13