Component E-E Cb Signal Level Adjustment (Vd-28 Board) - Sony DSR-50P Service Manual

24. Component E-E CB Signal Level Adjustment
(VD-28 Board)
Mode E-E
Signal Color bar (NTSC: with 7.5% setup)
(CAMERA input) (Note)
Measurement Point COMPONENT OUTPUT B-Y
terminal (75 Ω terminated)
Measuring Instrument Oscilloscope
Adjustment Page E
Adjustment Address 95
Specified Value A = 700 ± 10 mVp-p (NTSC)
A = 525 ± 10 mVp-p (PAL)
Note1: Set "CAMERA" mode with INPUT SELECT switch
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: E, address: 95, change the data and adjust the
component CB signal level (A) to the specified value.
3) Press the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
A
Fig. 5-3-30
H
5-70