Serialport Settings; Serialport Baudrate; Serialport Loginrequired; Serialport Mode - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

SerialPort settings

SerialPort Mode

Enable/disable the serial port (COM port).
Requires user role: ADMIN, INTEGRATOR
Default value: On
Value space: Off/On
Off: Disable the serial port.
On: Enable the serial port.

SerialPort BaudRate

Define the baud rate (data transmission rate, bits per second) for the serial port.
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1;
Flow control: None.
Requires user role: ADMIN, INTEGRATOR
Default value: 115200
Value space: 9600/19200/38400/57600/115200
Set a baud rate from the baud rates listed (bps).

SerialPort LoginRequired

Define if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017.
Configuration Peripherals Maintenance
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
130
Administrator Guide
System settings System settings Appendices