Nokia Customer Care
• Connection to a compatible car radio loudspeaker via the line-in input of the car
radio. The audio level will need to be adjusted suitably if this option is used.
Function Test
After the CarKit Phone has been installed, it needs to be checked to ensure that it is
working properly. When testing the operation of the equipment, also check that it has
been mounted so that it in no way impairs the driver during operation of the vehicle.
• To make a wireless connection between the CarKit Phone and a compatible
accessory with Bluetooth technology, ensure that the devices are within the
range necessary for Bluetooth transmission. Remember that external devices
need to be supplied with sufficient power for this feature (check the battery
pack).
Power Cable PCU-4
Technical Data
Battery voltage
Current carrying capacity
Transmitting power
Issue 2.0 Mar/2005
Company Confidential
12.6 V DC (10.8 - 16.0 V)
1.5 A (standby mode 1 mA)
EGSM 900
DCS 1800
Figure 3: Power Cable PCU-4
Copyright © 2005 Nokia Corporation
Company Confidential
3.2 mW - 2 W
1.0 mW - 1 W
TFE-4/RV-1
7 - Installation
Page 7-9