Assembly; Unpacking Your Table Saw; Items Not Supplied; Items Supplied - Hitachi C 10RJ Safety Instructions And Instruction Manual

UNPACKING YOUR TABLE SAW

This product requires assembly.
• Carefully lift saw from the carton and place it on a level work surface.
CAUTION:
This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help
when needed.
• Inspect the tool carefully to make sure that no breakage or damage occurred during shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
• The saw is factory set for accurate cutting. After assembling it, check for accuracy. If shipping has influenced
the settings, refer to specific procedures explained in this Operator's Manual.
• If any part is missing or damaged, do not attempt to assemble the table saw, plug in the power cord, or
turn the switch ON until the missing or damaged part is obtained and is installed correctly.
WARNING:
Remove the protective polyfoam from between the saw's housing and the motor.
WARNING:
The use of attachments or accessories not listed in this manual might be hazardous and
could cause serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with
this tool. Any such alteration or modification is misuse, and could result in a hazardous
condition leading to possible serious personal injury.
WARNING:
Do not connect to the power supply until assembly is complete. Failure to comply could
result in accidental starting and possible serious personal injury.
WARNING:
Always make sure the table saw is securely mounted to the stand. Failure to heed this
warning can result in serious personal injury.
YOU WILL NEED

ITEMS NOT SUPPLIED

Flat head screwdriver
Screwdriver
13mm wrench / Adjustment wrench
Framing square
Triangle square
WARNING:
To avoid injury, do not connect this table saw to a power source until it is completely
assembled and adjusted and you have read and understood the operator's manual.
CAUTION:
Many of the illustrations in this manual show only portions of the table saw. This is
intentional so that we can clearly show points being made in the illustrations. Never
operate the saw without all guards securely in place and in good operating condition.

ASSEMBLY

ITEMS SUPPLIED

Blade wrench (2 pc)
2.5mm Hex key (1 pc)
4mm Hex key (1 pc)
5mm Hex key (1 pc)
English
17