Table of Contents
Advertisement
POWER SUPPLY
AC POWER
OPERATION
Connect
one end of the mains lead to the AC
INPUT
socket
(Fig.
2) on the unit and the
other end to the AC outlet.
The
unit
is not disconnected
from
the
mains unless the mains lead is unplugged
from the
AC
outlet.
BATTERY
POWER
OPERATION(Fig.
3)
1. Open
the
battery
compartment
lid
by
pressing
down on the tabs.
2. Install
8 x "D" size batteries(not
supplied).
Refer
to the
polarity
diagram
on
the
battery
compartment
of the unit. Match the
(+) and (-) marks on the diagram
to the (+)
and (-) marks on the batteries.
3. Replace
the lid.
CAUTION:
WHEN INSTALLING
BATTERIES
To prevent battery electrolyte
leakage,
which
may result in injury and damage
to the unit
or other
objects,
observe
the
following
precautions:
1. All batteries
must be installed
with the
proper
polarity
(see
diagram
on the
battery compartment
of the unit).
2. Do not mix new with old or used batteries.
3. Only use batteries
of the same type and
brand.
4, Remove
the batteries
when they are not
to be used for a long period time.
COMMON
OPERATION
Adjusting
the
volume
Turn (VOLUME).
Bassexpander
System
Switch (BASSXPANDER)
to ON to enchance
the bass sound.
Stereo
headphones
socket
Insert the miniplug from a pair of headphones
(not supplied)
into the PHONES socket. When
the headphones
are plugged
in, speakers
are
automatically
disconnected.
CD PLAY
-
Both 8 cm and 12 cm discs can be played
in this unit.
NOTE:
Place
only one disc at a time
in the CD
compartment.
- Only disc bearing
the logo in Fig. 5 can be
played in this unit.
Handling
compact
discs
- Always
place the compact
disc in the CD
compartment
with the label facing
upward.
Compact
discs can be played
on only one
side.
- Fingerprints
and dust should
be carefully
wiped off the disc's signal surface (opposite
the labeled side) with a soft cloth. Gently wipe
in a straight
motion
from the inside to the
outside of the disc.
- Discs should be returned to their cases after
used to avoid serious
scratches
that could
cause the player to skip,
- Do not expose a disc to direct sunlight,
high
humidity,
or high temperatures
for extended
periods of time to prevent wraping the disc.
- Do not stick paper
or write
anything
with
a ballpoint pen on a disc.
- Do not use cleaners
or antistatic
sprays on
discs, like those used for phonograph
records
LOADING A DISC
1. Set to CD mode.
(PLAY/PAUSE)
button will be on,
2. Press (OPEN). The lid will open.
3. Place
a disc
carefully
on the turntable
in the CD compartment,
with the label side
facing up (Fig.6).
4. Press down the lid to close it. The display
will show the total number and total playing
time of tracks on disc.
NOTES:
- If a disc is loaded upside down, or if no disc is
loaded,
the
CD player
will
not operate.
- During
CD
play,
do
not
open
the
CD
compartment
lid. Always press(STOP/CLEAR)
and wait for the disc to stop rotating before
opening the CD compartment
lid.
5
Advertisement
Table of Contents
