Configuring The Wireless Modem Router; Log On The Webpages; Webpages' Menu Structure; Adsl / Internet Settings Webpages - Philips CGA7740N Quick Start Manual

4

Configuring the Wireless Modem Router

Advanced users may want to change the configuration of their Wireless
Modem Router. This chapter explains how to access the configuration
webpages, show you the struture of these webpages and it describes
them.

4.1 Log on the webpages

1 Open your Internet Browser
2 Enter http://192.168.2.1 in the address field
Click on GO
3
• The following webpage will be displayed
Note
The only default language is English.
To access the required webpage, click on the corresponding tab on
4
the left side of the page

4.2 Webpages' menu structure

The table below describes the menu tree of the webpages.
SET UP WIZARD
Note
It is highly recommended to use the Easy Install program
available on the provided CD ROM instead of the SET UP
WIZARD pages.
ADSL / Internet Settings
Security
8
Getting started
Wireless settings
ADSL settings
Confirm
Connection status

ADSL status

ISP settings
Parameters
DNS
Firewall
Access Control
MAC Filter
URL blocking
Schedule Rule
Intrusion Detection
Wireless Security
Wireless Encryption
Access control
Home Network Settings
Advanced settings

4.3 ADSL / Internet Settings webpages

4.3.1 ADSL status
Click on "ADSL Status" which is located on the left side of the screen.
DMZ
The left-hand side displays the main menu and the right-hand side shows
descriptive information.
WPA/WPA2
Wi-Fi Protected Setup
Status
Network settings
Wireless
Channel and SSID
NAT
Address Mapping
Virtual Server
Special Applications
NAT Mapping Table
Maintenance
Configuration Tools
Firmware Upgrade
System
Time Settings
Password Settings
Remote Management
SNMP Community
Community
UPNP
QoS
Traffic mapping
Traffic statistics
DDNS
Routing
Static route
Routing table
Configuring the Wireless ADSL Modem Router
WEP
802.1X
PIN
PBC
Manual
Reset
Trap
RIP