Philips CPWBS001 Instructions For Use Manual page 29

ENGLISH
29
Fixed-IP xDSL
Some xDSL Internet Service Providers may assign a fixed (static) IP address.
If you have been provided with this information, choose this option and
enter the assigned IP address, gateway IP address, DNS IP addresses, and
subnet mask. Click FINISH to complete the setup.
PPPoE xDSL
Enter the PPPoE User Name and Password assigned by your Service
Provider.The Service Name is normally optional, but may be required by
some service providers.
Leave the Maximum Transmission Unit (MTU) at the default value unless
you have a particular reason to change it.
Enter a Maximum Idle Time (in minutes) to define a maximum period of
time for which the Internet connection is maintained during inactivity. If the
connection is inactive for longer than the Maximum Idle Time, it will be
dropped. (Default: 10)
Enable the Auto-reconnect option to automatically re-establish the
connection as soon as you attempt to access the Internet again. Click
FINISH to complete the setup.