Advertisement
Playing a CD
This CD-player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
1 Push the OPEN 2 slider to open the player.
2 Insert an audio CD, printed side up, by pressing the
CD onto the hub.
3 Close the player by pressing the lid down.
4 Press 2; to switch the player on and start playback.
yThe current track number and elapsed playing
time are displayed.
• You can pause playback by pressing 2;.
yThe time at which playback was paused starts
flashing.
• You can continue playback by pressing 2; again.
5 Press 9 to stop playback.
yThe total number of tracks and the total playing
time of the CD are displayed.
6 Press 9 again to switch the player off.
• To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
Selecting a track and searching
Selecting a track during playback
3
• Briefly press ∞ or § once or several times to skip to the current, previous or
next track.
yPlayback continues with the selected track, and
Selecting a track when playback is stopped
1 Briefly press ∞ or § once or several times to select
the desired track. The track number is displayed.
2 Press 2; to start CD play.
yPlayback starts with the selected track.
Searching for a passage during playback
1 Keep ∞ or § pressed to find a particular passage in
a backward or forward direction.
E S P
ySearching starts while playback continues at low
2 Release the button when you reach the desired passage.
yPlayback continues from this position.
E S P
Notes: – If the player is in SCAN mode (see MODE chapter), searching is not
0
the track's number is displayed.
volume. After 2 seconds the search speeds up.
possible.
– In
shuffle, shuffle repeat all or repeat
while playing a program, searching is only possible within the
particular track.
mode (see MODE chapter), or
Advertisement
