Related Manuals for D-Link DVA-5582
Summary of Contents for D-Link DVA-5582
-
Page 1: User Manual
Version 1.00 | 03/24/2017 User Manual AC1600 VDSL2 VoIP Gigabit Modem Router DVA-5582... -
Page 2: Manual Revisions
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description 1.00 March 24, 2017 • Initial release... -
Page 3: Table Of Contents
Routing Policy ............44 USB Interface Configuration Wizard .......18 Traffic Classification ..........45 PPP (USB) ................19 ALG Flows ..............46 Pure Bridge ...............20 Policers .................47 PPP ..................21 Queues .................48 PPP (Cont) .................22 ALG ..................49 IPv4 Interface (IP over ATM) ........23 D-Link DVA-5582 User Manual... - Page 4 Storage Device ..............73 SIM Card ................. 101 Network File Sharing ............74 USB Modem ..............102 User Accounts ..............75 Operator ................. 103 FTP Server .................76 WiFi-1.1 (2.4 GHz) ............. 104 DLNA Media Sharing ............77 WiFi-2.1 (5 GHz) ..............105 D-Link DVA-5582 User Manual...
- Page 5 What is Wireless? ..............127 Tips ....................129 Wireless Modes ................. 130 Networking Basics ............131 Check your IP address ............131 Statically Assign an IP address ..........132 Wireless Security ............133 What is WPA? ..............133 Technical Specifications ..........134 D-Link DVA-5582 User Manual...
-
Page 6: Product Overview
Power Adaptor If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DVA-5582 will cause damage and void the warranty for this product. -
Page 7: System Requirements
Utility Requirements • Firefox 36 or higher • Safari 8 or higher • Chrome 40 or higher Windows Users: Make sure you have the latest version of Java ® installed. Visit www.java.com to download the latest version. D-Link DVA-5582 User Manual... -
Page 8: Introduction
Section 1 - Product Overview Introduction The DVA-5582 AC1600 VDSL2 VoIP Gigabit Modem Router is a highly integrated router with everything your home or small business needs for high-speed Internet access. It combines an ADSL2+/VDSL2 modem, Gigabit Ethernet Internet Port, 4G mobile Internet support, Voice over IP (VoIP), and Gigabit wireless together in a single, easy to use product that shares an Internet connection for all your devices. -
Page 9: Hardware Overview
WPS pairing in Progress. Blinking Data is being transmitted through the WLAN interface. Green The connection of WLAN interface is normal. 4 2.4 GHz The WLAN connection is not established. Orange Blinking WPS pairing in Progress. D-Link DVA-5582 User Manual... - Page 10 The device attempted an Internet connection, but failed. No signal is detected. 6 xDSL Green Blinking The device is detecting a DSL signal. DSL Online. The power is off. Green 7 Power The system startup is complete. Orange Power failure. D-Link DVA-5582 User Manual...
-
Page 11: Rear View
5 seconds, and then the system restores the default settings. Press for 1 second to enable WPS pairing. Press and hold for 10 seconds to disable Wi-Fi. USB port, for connecting a 3G/4G dongle or other USB storage devices. D-Link DVA-5582 User Manual... -
Page 12: Installation
If you use 3G/4G Internet service, connect the 3G USB data card to the USB interface on the side panel. If you use phone service through the Internet, connect a telephone handset to the PHONE interface on the rear panel. D-Link DVA-5582 User Manual... -
Page 13: Configuration
To proceed with configuration, click Advanced Configuration. If you are configuring the DVA-5582 for the first time, you will be able to access the Configuration Wizard from that screen. -
Page 14: Home
Home Network: The Home Network menu item shows a map of the local network, lists all network interfaces, and provides links to both firewall configuration and WAN configuration. For details, see Home Network on page 78. D-Link DVA-5582 User Manual... - Page 15 The WiFi-1.1 (2.4GHz) and WiFi-2.1 (5GHz) are direct links to the (2.4GHz) and Wi-Fi configuration for each channel. For details, see WiFi-1.1 (2.4 WiFi-2.1 (5GHz): GHz) on page 104 and WiFi-2.1 (5 GHz) on page 105. D-Link DVA-5582 User Manual...
-
Page 16: Configuration Wizard
Configuration Wizard: Phase 1 Click Next to configure your Internet connection. or click Skip to proceed directly to Phase 2 to configure you Wi-Fi settings. Clicking Cancel will return to the Home screen and discard any changes. D-Link DVA-5582 User Manual... -
Page 17: Physical Wan Interface
3G/4G dongle or other USB device. For details, see USB Interface Configuration Wizard on page 18. The subsequent steps will be different depending on the type of interface selected. Click Next to start the configuration wizard, or Cancel to return to the homescreen. D-Link DVA-5582 User Manual... - Page 18 If you have selected PTM (Packet Transfer Mode) for the DSL Link Type, see Ethernet Layer Settings (IP Encapsulation) on page 15. Click Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual...
-
Page 19: Atm Configuration
If you have selected PPP over ATM, clicking Next will take you to PPP on page 21. Click Next to start the configuration wizard, Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 20: Ethernet Layer Settings (Ip Encapsulation)
If you have selected Pure Bridge (no WAN IP) see Pure Bridge on page 20. Click Next to continue the configuration wizard, Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 21: Dsl Line Configuration Wizard
Choose this interface if your primary Internet connection comes from a 3G/4G dongle or other USB device. Click Next to continue the configuration wizard, Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 22: Wan Ethernet Configuration Wizard
If VLAN Termination is required by your Ethernet network, select Yes and select a VLAN. The default setting is No. Click Next to continue the configuration wizard, Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 23: Usb Interface Configuration Wizard
*99#. This information should be provided by your carrier. Clicking Next will prompt you to configure PPP (USB) on page 19. Click Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 24: Ppp (Usb)
Click Next to proceed to the IPv4 Interface on page 24. Click Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 25: Pure Bridge
Bridge and VLAN on page 35 before continuing the Wizard. Click Next to proceed to the Phase 1 Settings Summary on page 26. Click Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 26: Ppp
Connect manually. Always connected is the default setting and will keep your connection online continuously. Other connection settings will prompt for additional settings. These settings may be useful for users on limited or metered connections. D-Link DVA-5582 User Manual... -
Page 27: Ppp (Cont)
Name: Service Name: Enter the PPPoE Service name here. Click Next to configure IPv4 interface settings documented on the following page. Click Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 28: Ipv4 Interface (Ip Over Atm)
Server appears if Setup Static DNS Servers is set to Yes. Click Next to configure IPv6 Interface Settings on page 25. Click Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 29: Ipv4 Interface
Setup Static DNS Servers is set to Yes. Click Next to configure IPv6 interface settings documented on the following page. Click Cancel to return to the homescreen, or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 30: Ipv6 Interface Settings
Note: IPv6 is disabled by default. In order to use IPv6, the protocol stack must be enabled by enabling global IPv6. Click Next to see a summary of your configuration and save your settings. Click Cancel to return to the home screen or Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 31: Configuration Wizard Phase 1
This is a summary of all previous settings. Click Apply to save your changes and continue to Phase 2 of the setup wizard, Cancel to return to the home screen, or Back to return to the beginning of Phase 1. D-Link DVA-5582 User Manual... -
Page 32: Configuration Wizard Phase 2
To continue, click Next and follow the instructions presented on the next page. Click Apply to save your changes and continue to Phase 2 of the setup wizard, Cancel to return to the home screen, or Back to return to the beginning of Phase 1. D-Link DVA-5582 User Manual... -
Page 33: Wireless Access Point
The password can be any letter, number, symbol, or space. Accent marks and non-ASCII characters are not supported. Passwords must be at least 8 characters. Show Password: This option shows the password as you type it.. D-Link DVA-5582 User Manual... - Page 34 The default port is 1812. Secondary Radius Enter your secondary RADIUS secret here. Secret: Click Apply to save settings and continue to the Configuration Wizard Summary on page 30. Click Close to return to the previous page. D-Link DVA-5582 User Manual...
-
Page 35: Configuration Wizard Summary
If you have opted to skip one phase, the skipped phase will be grayed out. Press Close to return save all changes and return to the homescreen. Press Back to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 36: Settings
QoS (Quality of Service) features. For details, see Routing and QoS on page 43. ALG: The ALG (application layer gateway) menu item allows the direct configuration of ALG modules. For details, see ALG on page 49. D-Link DVA-5582 User Manual... - Page 37 IPv6 configuration policy. For details, see IPv6 on page 69. Autosense The Autosense Failover menu item allows you to configure backup Failover: internet connections should your primary WAN go down. For details, see Autosense Failover on page 71. Click Close to return to the homescreen. D-Link DVA-5582 User Manual...
-
Page 38: Physical Interfaces
Physical Interfaces This screen displays a list of all physical interfaces. Clicking any one will bring up a sub menu with configuration options. Active interfaces are highlighted in green. Click Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 39: Network Connections
Select New LAN Interface and follow the on-screen instructions to create a new LAN interface. Selection New VPN Client and follow the on-screen instructions to setup a new VPN client. Click Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 40: Bridge And Vlan
For details, see Bridge List on page 36. Bridge Filters: This menu displays a list of all bridge filters and provides options for managing them. For details, see Bridge Filters on page 37. Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 41: Bridge List
You may Modify, Delete, or Filter by clicking on the buttons to the right-hand side of the corresponding bridge. Select Add New Bridge and follow the on-screen instructions to add a new bridge Click Apply to save settings or Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 42: Bridge Filters
This section is for advanced users and network professionals only and can be safely ignored by a majority of users. Click Add New Bridge Filter and follow the on-screen instructions to add a new bridge filter. Click Apply to save settings or Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 43: Dhcp Server And Relay
Note: Disabling the DHCP server will preventing you from accessing the configuration interface. In order to regain access, a factory reset will be required. Click Apply to save settings or Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 44: Dns Client And Relay
This section has three sub-menus which are described on the following pages: DNS Client on page 40 DNS Relay on page 41 Hostnames on page 42 Click Apply to save settings or Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 45: Dns Client
Select Add Server to and follow the on-screen instructions to add a new server. Select Add Rule for Dynamic Server to add new rules to the list. Click Apply to save settings or Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 46: Dns Relay
Select Add Server to and follow the on-screen instructions to add a new server. Select Add Rule for Dynamic Server to add new rules to the list. Click Apply to save settings or Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 47: Hostnames
This screen allows you to configure a local hostname for easy access to your router without needing to keep track of your router's IP address. Click Apply to save settings or Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 48: Routing And Qos
Traffic Classification on page 45 ALG Flows on page 46 Policers on page 47 Queues on page 87 This section is for advanced users and network professionals only and can be safely ignored by a majority of users. D-Link DVA-5582 User Manual... -
Page 49: Routing Policy
Click the check boxes to disable any specific route. Click Add New Route to add a new route. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 50: Traffic Classification
Traffic classes may be modified or deleted with the buttons on the right hand side of the screen. Click Add New Class to add a new traffic class. Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 51: Alg Flows
The Application Layer Gateway (ALG) flows allows you to configure dynamic port and address translation for traversal over the NAT firewall. Click Add New Flow to configure this for a new application and follow the on-screen instructions. Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 52: Policers
Click Add QoS Policer and follow the on-screen instructions to configure a new policer. Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 53: Queues
The default layout includes PTM, ATM, and Ethernet WAN interfaces. You may modify or delete existing queues using the modify and delete buttons to the right. Click Add QoS Queue and follow the on-screen instructions to add a new queue. Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 54: Alg
Modify icon on the right-hand side corresponding to the module you wish to change. This section is for advanced users and network professionals only and can be safely ignored by a majority of users. Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 55: Nat And Port Mapping
It has three sub menus described on the following pages: NAT Interface Settings on page 51 Port Mapping on page 52 Public Addresses on page 53 Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 56: Nat Interface Settings
Click Add new NAT and follow the on-screen instructions to create a new NAT interface. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 57: Port Mapping
Select Port Mapping for Known Application to create a mapped port from an internal database of protocols. Select New Custom Port Mapping to create a custom mapped port. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 58: Public Addresses
Select Add Mapping to add a new port mapping. Selecting bridges or DHCP servers will take you to their respective configuration pages. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 59: Proxies
This section contains three submenus described on the following pages: IGMP Proxy on page 55 RTSP Proxy on page 56 PPPoE Proxy on page 57 Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 60: Igmp Proxy
If applicable, these settings should be provided by your network administrator. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 61: Rtsp Proxy
Enabling this feature allows applications that uses Real Time Streaming Protocol (RTSP) to receive streaming media from the Internet. If applicable, these settings should be provided by your network administrator. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 62: Pppoe Proxy
Specific settings may be required to use proxy configuration. If applicable, these settings should be provided by your network administrator. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 63: Vpn
This section contains two submenus described on the following pages: PPTP / L2TP Server on page 59 IPsec on page 60 Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 64: Pptp / L2Tp Server
Select New VPN Server and follow the on-screen instructions to configure a new VPN server using the PPTP or L2TP protocols. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 65: Ipsec
IPsec protocol. Select IPsec wizard and follow the on- screen instructions to configure a new VPN server using the PPTP or L2TP protocols. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 66: Dynamic Dns
IP address is. Select Add a Provider and follow the on-screen instructions to configure a new DDNS provider. Click Apply to save settings, Refresh to update the page, or click Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 67: Date / Time
Note that manual date/time information may be lost in the event of a power failure. Click Apply to save settings, Refresh to update the page, or click Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 68: Management
This section contains four submenus described on the following pages: UPnP Agent on page 64 Telnet Server on page 65 SSH Server on page 66 Users on page 67 Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 69: Upnp Agent
This page is used to configure UPnP. UPnP helps to automatically configure software and devices on your network to access the resources they require. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 70: Telnet Server
This page allows you to enable and configure telnet remote administration of the device. Use of this feature is not recommended for novice users. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 71: Ssh Server
This page allows you to enable and configure SSH remote administration of the device. Use of this feature is not recommended for novice users. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 72: Users
Note that you cannot delete an active user. To add a new user, select Add User and follow the on-screen instructions. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 73: Voip Service
ISP. This section is for advanced users and network professionals only and can be safely ignored by a majority of users. Click Apply to save settings, Refresh to update the page, or click Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 74: Ipv6
This section contains one submenu described on the following page: Global Settings on page 70 Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 75: Global Settings
This menu allows you to configure global IPv6 settings. This information should be provided by your ISP or network administrator. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 76: Autosense Failover
Delete button on the right-hand side. To create a new failover group, select New Group and follow the on-screen instructions. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 77: Storage Service
Storage Device on page 73 Network File Sharing on page 74 User Accounts on page 75 FTP Server on page 76 DLNA Media Sharing on page 77 Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 78: Storage Device
Storage Device If an external storage device is attached, it will appear at that top of the Storage Service screen. To configure a device, click the corresponding Settings button. Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 79: Network File Sharing
Network File Sharing This page allows you to enable and configure basic filesharing features to remotely access your media across the network. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 80: User Accounts
User accounts may also be require to access FTP services. Click Add User to create a new user. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 81: Ftp Server
Section 3 - Configuration FTP Server This page allows you to configure remote access to storage using the industry- standard FTP protocol. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 82: Dlna Media Sharing
When enabled, you will be prompted to select an interface on which to enable DLNA access, as well as which attached storage devices to share. Click Apply to save settings, Refresh to update the page, or click Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 83: Home Network
This section is for advanced users and network professionals only and can be safely ignored by a majority of users. Click Refresh to update the page, or click Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 84: System
Reboot on page 81 Factory Reset on page 82 Save Configuration on page 83 Backup Configuration File on page 84 Load Configuration File on page 85 Firmware Upgrade on page 86 Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 85: Logging
The logging menu provides a detailed log of all router activity and allows fine control over logging information. Logs can be downloaded as text files for analysis and archiving. Click System in the top left corner to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 86: Reboot
It also allows you to schedule a reboot on a timer of up to one hour. Click Reboot to restart the router or execue a scheduled reboot, or click Cancel to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 87: Factory Reset
This setting allows you to reset the router to factory defaults over the UI. Note: Resetting the router will cause all settings to be lost. Wi-Fi will be offline until reconfigured. Click Reset to activate the factory reset procedure, or click Cancel to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 88: Save Configuration
Note: Most settings are generally saved when you click Apply, but this is provided as an extra layer of verification Click Save Configuration to save all settings to persistent memory, or click Cancel to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 89: Backup Configuration File
Select from Full Device Configuration or User settings only. Click Save Configuration to download a copy of your settings, or click Cancel to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 90: Load Configuration File
This screen allows you to restore settings previous backed up using Backup Configuration File on page 84. Select Browse and navigate to your configuration file. Click Upload to upload your settings and reboot, or click Cancel to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 91: Firmware Upgrade
Click on Browse to locate the firmware file to be used for the update. Click Upload to upload your firmware and reboot, or click Cancel to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 92: Diagnostic
Download on page 90 Upload on page 91 Traceroute on page 92 Interfaces Summary on page 93 CPU Load Memory Usage on page 94 Active Connections on page 95 Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 93: Udp Echo
UDP Echo can be used to test the roundtrip times of packets over a network. Enter the appropriate test parameters Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 94: Ping
Section 3 - Configuration Ping The Ping section enables you to run an IPv4 connectivity test. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 95: Download
Download This section allows you to measure network performance by downloading a test file from a URL of your choice. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 96: Upload
Upload This section allows you to measure network performance by uploading a test file from a URL of your choice. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 97: Traceroute
The Traceroute section enables you to run a traceroute test to see how your traffic traverses the Internet. Input a Hostname or IP Address and select an interface. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 98: Interfaces Summary
Section 3 - Configuration Interfaces Summary This screen displays a complete summary of all interfaces on the router. Click Close to return to the previous menu. D-Link DVA-5582 User Manual... -
Page 99: Cpu Load Memory Usage
Section 3 - Configuration CPU Load Memory Usage This screen shows the current status of the router's CPU and memory usage. Click Refresh to update the page, or click Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 100: Active Connections
This screen lists all active connections over all interfaces. It can be used to diagnose connectivity and unusual traffic activity from you network. Click Refresh to update the page, or click Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 101: Security
Internet. This section contains three submenus described on the following pages: Firewall on page 97 DMZ on page 98 Captive Portal on page 99 Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 102: Firewall
This screen allows you to configure the router's built in firewall. Note that disabling the firewall may expose your network to attacks over the internet and is not recommended. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 103: Dmz
DMZ is exposed to various types of security risks. If you use DMZ, take measures (such as client-based virus protection) to protect the remaining client PCs on your LAN from possible contamination through DMZ. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 104: Captive Portal
This screen allows you to configure a landing page that any unauthenticated device on your network will load first before being granted access to the network. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 105: Modem
The modem section provides configuration options for an external USB modem. It contains the following submenus: SIM Card on page 101 USB Modem on page 102 Operator on page 103 Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 106: Sim Card
Section 3 - Configuration SIM Card If you have attached a compatible USB modem and SIM card, information about the SIM will be displayed on this page. Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 107: Usb Modem
This screen displays a full list of all pre-configured USB 3G/4G modems. Existing modems may be deleted or mofified. If you wish to attach a new modem, click Add New USB Modem and follow the on-screen instructions. Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 108: Operator
Section 3 - Configuration Operator On this screen you will see the current Layer 2 (L2) interface configuration. Click Add to add another interface, or Delete to delete the currently selected interface. Close to return to the previous screen. D-Link DVA-5582 User Manual... -
Page 109: Wifi-1.1 (2.4 Ghz)
Section 3 - Configuration WiFi-1.1 (2.4 GHz) This screen allows you to configure the 2.4 GHz radio for 802.11n/g/b wireless access. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 110: Wifi-2.1 (5 Ghz)
Section 3 - Configuration WiFi-2.1 (5 GHz) This screen allows you to configure the 5 GHz radio for 802.11ac/n/a wireless access. Click Apply to save your changes, or Close to return to the previous menu without saving. D-Link DVA-5582 User Manual... -
Page 111: Connect A Wireless Client To Your Router
WPS. Once you know, follow the steps below: Step 1 - Press the WPS button on the DVA-5582 for about 1 second. The WiFi LEDs on the front will start to blink orange. -
Page 112: Windows® 8
Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DVA-5582 User Manual... - Page 113 WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DVA-5582 User Manual...
-
Page 114: Windows® 7
If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DVA-5582 User Manual... - Page 115 If you get a good signal but cannot access the Internet, check your TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DVA-5582 User Manual...
- Page 116 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DVA-5582 User Manual...
-
Page 117: Wps
Section 5 - Connecting to a Wireless Network The WPS feature of the DVA-5582 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. - Page 118 Section 5 - Connecting to a Wireless Network 3. Double-click the DVA-5582. 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next. D-Link DVA-5582 User Manual...
- Page 119 Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DVA-5582 User Manual...
- Page 120 Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DVA-5582 User Manual...
-
Page 121: Windows Vista
(displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DVA-5582 User Manual... -
Page 122: Wpa/Wpa2
1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DVA-5582 User Manual... - Page 123 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DVA-5582 User Manual...
-
Page 124: Windows® Xp
Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DVA-5582 User Manual... -
Page 125: Wpa/Wpa2
1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link DVA-5582 User Manual... - Page 126 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DVA-5582 User Manual...
-
Page 127: Troubleshooting
1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. - Page 128 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
- Page 129 You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the D-Link DVA-5582 User Manual...
- Page 130 • To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DVA-5582 User Manual...
-
Page 131: Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers. -
Page 132: What Is Wireless
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. - Page 133 Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits • Gives everyone at home broadband access •...
-
Page 134: Tips
The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. -
Page 135: Wireless Modes
• Ad-Hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DVA-5582 wireless network Cardbus adapters. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. -
Page 136: Networking Basics
Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. -
Page 137: Statically Assign An Ip Address
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DVA-5582 User Manual... -
Page 138: Wireless Security
Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DVA-5582 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) •... -
Page 139: Technical Specifications
MER (a.k.a IP over Ethernet over AAL5) • • Support ALG (Application Level Gateways) ADSL Features • T1.413i2, G.992.1 Routing Features • G.dmt, G.992.2, G.lite • RFC768 User Datagram Protocol (UDP) • G.992.3 (G.bis/ADSL2) • RFC791 Internet Protocol (IP) D-Link DVA-5582 User Manual... - Page 140 In-band (voice encoded) or out-of-.band (over RTP) transport of • 210 x 170 x 49.5 mm (8.28 x 6.69 x 1.95 in) DTMF signaling • Supplementary Services Weight • CLIP, CNIP, CLIR • 520 g (10.34 oz) • Call Forwarding D-Link DVA-5582 User Manual...
- Page 141 Operating: 5 to 40 °C (41 to 104 °F) • Storage: -20 to 70 °C (-4 to 149 °F) Humidity • Operating: 10% to 95% non-condensing • Storage: 5% to 95% non-condensing Certifications • • RoHS • Wi-Fi Certified • WPS Setup D-Link DVA-5582 User Manual...
- Page 142 Potencia máxima de Salida Frequenza/e Potenza max. Output Frequentie(s) Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 2.4 G 2.4 – 2.4835 GHz 100 mW D-Link (Insert Model Number) User Manual...
- Page 143 υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink. com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...
- Page 144 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...
- Page 145 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-firmware kan hämtas från produktsidan på www.dlink.com. Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
- Page 146 Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link (Insert Model Number) User Manual...
- Page 147 5 Ghz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link (Insert Model Number) User Manual...
- Page 148 Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link (Insert Model Number) User Manual...
- Page 149 Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link (Insert Model Number) User Manual...
- Page 150 Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link (Insert Model Number) User Manual...
- Page 151 Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link (Insert Model Number) User Manual...
- Page 152 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
- Page 153 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
- Page 154 D-Link e l'ambiente D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto, D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di tossicità...
- Page 155 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
- Page 156 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
- Page 157 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
- Page 158 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.