Monitor The Run - GE akta pure Operating Instructions Manual

6.4

Monitor the run

Introduction
You may follow the on-going method run in the System Control module. The current
system status is shown in the System state panel in the Run Data pane. For example,
it may state Run, Wash or Hold.
See
shown in System Control during a run, the layout of the module and the procedure to
customize the view of the different panes.
Process picture
The Process picture pane displays the current flow path during the run and can be used
to control the run. Color indication is applied, as shown in the table below. Real-time
data from monitors are also displayed in the process picture. See illustration below.
Color
Green
Grey
ÄKTA pure Operating Instructions 29022997 AF
Section 3.2.2 The System Control module, on page 53
Indication
Open flow path with flow
Closed flow path or an open path without flow.
6 Run a method

6.4 Monitor the run

for information about the data
127