Yamaha CL5 Reference Manual page 201

In Alternate mode, the following knobs change their behavior.
• [GAIN] knob
Rotate the knob to adjust the digital gain value. If DIGITAL GAIN has been selected for
HA KNOB FUNCTION on the PREFERENCE page in the USER SETUP window, rotate this
knob to adjust the analog gain value of the head amp.
• [MIX/MATRIX] knob
Rotate this knob to switch between PRE and POST for the corresponding send signal.
Press this knob to switch the corresponding send signal on or off.
• [HPF] knob
Press this knob to switch the high-pass filter on or off.
• [DYNAMICS 1] knob
Press this knob to switch DYNAMICS 1 on or
• [DYNAMICS 2] knob
Press this knob to switch DYNAMICS 2 on or
NOTE
In Alternate mode, all knobs in the SELECTED CHANNEL section other than those knobs
mentioned above will be disabled.
Switching banks for USER DEFINED key settings
You can register the USER DEFINED key settings (16 keys for CL series consoles) to a
maximum of four banks.
off.
off.
Use the four BANK SELECT buttons on the left to select a bank.
You can press the CLEAR ALL button on the top right side to clear the content of the selected
bank.
198
Setup
Reference Manual