Configure Bluetooth Settings; Making The Ct50 Discoverable; Rename Or Disconnect A Paired Device - Honeywell CT50 User Manual

DRAFT
Chapter 6 — Configure the Computer

Configure Bluetooth Settings

You configure Bluetooth settings in the Settings app.
1 Start the Settings app and tap Bluetooth.
2 Tap the Menu icon

Making the CT50 Discoverable

By default, the CT50 is not discoverable, which means that the computer
will not be found by other Bluetooth devices.
1 Tap All Apps > Settings.
2 Verify the Bluetooth radio is activated.
3 Tap Bluetooth.
4 Tap CT50 (the default computer name) at the top of the screen to

Rename or Disconnect a Paired Device

You can rename or disconnect a paired Bluetooth device from the
Settings app.
1 Open the Settings app and tap Bluetooth.
2 Tap the Settings icon
3 To rename the device, tap Rename, type the new name, and then tap
68
and select a setting from the menu:
• Tap Rename phone to change the computer device name. Type
the new name and then tap Rename.
• Tap Visibility timeout to set the amount of time that the
computer is visible to other Bluetooth devices. By default, the
timeout is set to 2 minutes. You can select 5 minutes, one hour, or
no timeout. Setting a shorter timeout value preserves battery life.
• Tap Show received files to view statistics on the received files.
make the device discoverable. The computer starts a 2 minute count
down during which time the computer is temporarily discoverable by
other devices using Bluetooth technology.
OK.
• To disconnect the device, tap Unpair.
in the Paired Devices list.
Dolphin CT50 Mobile Computer User Guide