Philips PET1046 User Manual page 41

Symptom
Completely distorted
picture / no colour in
the TV screen
No sound
Disc can't be played
The player does not
respond to the remote
control
Distorted or B/W pic-
ture with DVD
Loss of current TV
programs when travel-
ling to another country
No audio at digital
output
Player does not respond
to all operating com-
mands during playback
Cannot detect USB
plug-in
Remedy
The NTSC/PAL setting may be in the
wrong status. Match your TV's setting with
the player's setting.
Check audio connections. If using a HiFi
amplifier, try another sound source.
• Ensure the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by trying
another disc.
Aim the remote control directly at the
sensor on the front of the player. Avoid all
obstacles that may interfere with the signal
path. Inspect or replace the batteries.
Use only discs formatted according to the
TV-set used (PAL/NTSC).
1 Press SETUP > TV & RADIO >
Country .
2 Select your country .
3 Select Auto search .
• Check the digital connections.
• Operations are not permitted by the disc.
• Refer to the instructions in the disc
inlay.
• Unplug the USB connection and plug-in
again. Detection may take some time that
vary with the capacity of your USB device.
• The DVD player only support Mass
Storage (MSC) format from USB flash
drive.
• The DVD player does not support Hard
Disk storage or Media Transfer Protocol
(MTP) format.