GE Advisor MASTER ATS111 series Manager Manual page 11

•
A door group for a night shift worker may allow their PIN code to be used to open a door
between 23:00 and 07:00 only.
Using a PIN code
When you enter your PIN code on the Advisor MASTER keypad, each key pressed is indicated by * on the
display.
If you enter the wrong PIN code, or a code/card that is not valid at the particular arming station, the keypad
will beep quickly seven times. Correct a wrong code by pressing [CLEAR] and enter the correct code.
If you access a menu and do not use any key for two minutes, you will automatically exit from the menu. It is
good practice to exit the menu using 0 [ENTER] or [CLEAR] rather than the time out facility because if
someone else uses the menu before it times out, the functions they use will be logged against your PIN code.
Users can only access the menu options that their PIN code had been authorised to access. When they try to
access an option that they are not authorised to access, they get the message: You are not authorised to enter.
Also, although users might be able to access a menu option, depending on how their PIN code has been
programmed, they might not be authorised to access all the information available on it.
See also: Program Users - Menu Option 14, page 45.
11