Philips PET7402A Quick Start Manual

Philips Portable DVD Player PET7402A

Quick start guide

1
Prepare (for in-car use)
1 Attach the main unit and the second screen
to the back of the front seat headrests.
2 Connect the supplied AV cable to the AV
OUT jack on the main unit and the AV IN
jack on the second screen.
3 Connect the supplied car adaptor cable to
the DC IN jacks on the main unit and the
second screen, and to the car cigarette
lighter socket.
Main unit
AV cable
Cigarette
lighter
Car adaptor
cable
Prepare (for domestic use)
1
Connect additional equipment (TV for
example)
1 Connect the AV OUT socket on the main
unit to the video and audio sockets on a TV
as shown directly.
2 Connect the AC adaptor cable to the DC
IN Jack on the main unit and the power
outlet.
Second screen
3 Switch on the TV and set to the correct
video-in channel.
➜ You can consult the owner's manual of
your TV. (If your TV does not have Audio
and Video inputs, you will need to
purchase a RF modulator. Please consult
your dealer.)
TV
Not supplied
White
Red
Yellow
Enjoy
2
1 Slide the ON/OFF switch to ON to switch
on the main unit.
2 Slide OPEN 2 on the main unit.
3 Remove the protective card (if any) and load
a disc with the label side facing up.
4 Close the disc compartment.
➜ Playback will start automatically. If not,
press 2;/OK.
5 To stop playback, press 9.
Note:
During play, you can:
– Press OPTION to select some play options:
audio, subtitle, repeat, and time display.
– Press BRIGHTNESS on the main unit or
rotate BRIGHTNESS -/+ on the second
screen to adjust brightness of screen to match
lighting conditions.
Printed in China PET7402A_37_QSG_V1.0